Installation of Natural Gas Orifice Spuds

To Convert Appliance For Use With Natural Gas

If this appliance has been converted for use with LP gas, each of the following modifications must be performed to convert the unit back to natural gas.

A.Replace all orifice spuds

Perform Steps 1 through 4 on page 4.

For Step 5: Locate the colored brass natural gas orifice spuds that were originally installed in this appliance before its conversion for use with LP gas. Observe the color of each of the spuds and note the correct burner location for each spud as shown in figure 10.

Complete Steps 6 through 9 on page 5 to complete the installation of natural gas main spuds in their correct locations.

Save the orifices removed from the appliance for future use. They will be needed if this appliance is again converted for use with LP gas.

Installation of Natural Gas Orifice Spuds

Figure 10

B.Invert Appliance Pressure Regulator Cap

With the appliance installed, the regulator is located on the underside of the appliance at the inlet to the gas manifold. Identify the type of regulator on the unit and follow the instructions in the appropriate illustration. (See figures 7 and 8).

After Steps A and B have been completed, check the appearance of each burners’ flame at the Hi and Lo settings against figure 9. If the flames appear too large or too small, review all steps to make sure they were completed correctly.

Installation of Natural Gas Orifice Spuds

This appliance is equipped for electronic auto-reignition by means of a spark igniter located at the side of each burner. The burners are designed to light at any valve rotation that admits sufficient gas flow to support a flame and to automatically re-light following a momentary loss of flame due to a draft or other adverse condition. This feature is provided as a convenience and is not intended as a safety feature.

This appliance has no air shutters, making adjustment of primary air unnecessary. The burners are designed to provide optimum aeration of all gases without air shutters. When operating properly, burners should produce clearly defined, even blue flames. If the flames have yellow tips or are hazy and otherwise appear to have insufficient air, obtain the services of a qualified service technician.

	NATURAL	PROPANE	ALL GASES
	GAS	PROPANE	ALL GASES
	BURNER RATE	BURNER RATE	LO RATE
BURNER	(BTU/HR)	(BTU/HR)	(BTU/HR)

Right Front	12,000	8000	1,600
Right Rear	6,500	4500	800
Left Front	6,500	4500	800
Left Rear	10,500	8000	1,600

CAUTION: Never cover control knobs or surrounding control surface with utensils, towels or other objects. Never obstruct free air passage past the control knobs. The knob openings have been sized to properly control air entry to the interior of the appliance during operation.

8101P575-60 specifications

The Jenn-Air 8101P575-60 is a high-performance electric cooktop that exemplifies modern culinary technology and innovative design, making it a noteworthy addition to any kitchen. This versatile appliance is engineered with advanced features that cater to both casual cooks and culinary enthusiasts, providing an exceptional cooking experience.

At the heart of the Jenn-Air 8101P575-60 is its powerful induction cooking technology. Induction cooktops use electromagnetic energy to directly heat the cookware, providing rapid heating and precise temperature control. As a result, this cooktop significantly reduces cooking time while ensuring consistent cooking results. The efficiency of induction cooking also means that heat is focused only on the pot or pan, keeping the kitchen cooler and reducing energy use.

One of the standout features of the Jenn-Air 8101P575-60 is its sleek, elegant design. The smooth glass surface not only enhances the aesthetic appeal of the kitchen but also makes cleaning effortless. Cooking spills and splatters can be easily wiped away, ensuring that your cooktop remains pristine with minimal effort.

The cooktop boasts multiple cooking zones, each equipped with varying power levels to accommodate a range of cooking tasks. From simmering sauces to searing meats, the Jenn-Air 8101P575-60 provides the flexibility to adapt to different cooking techniques. Additionally, the cooktop includes features like a built-in timer and a bridge element that allows for the combination of two cooking zones, ideal for larger cookware and more complex meals.

Safety is another critical aspect of the Jenn-Air 8101P575-60 design. It incorporates features such as an automatic shut-off function and a child lock, providing peace of mind for families with young children. These safety features ensure that the cooktop operates safely and efficiently, limiting the risk of accidents in the kitchen.

Another notable characteristic is the intuitive touch controls that allow for effortless adjustment of heat settings. Users can quickly fine-tune temperatures or switch between cooking zones with just a tap, making the cooking process smooth and efficient.

Overall, the Jenn-Air 8101P575-60 exemplifies the perfect blend of style and functionality. Its state-of-the-art induction technology, elegant design, versatile cooking options, and safety features make it a standout choice for anyone looking to elevate their culinary capabilities while maintaining a sophisticated kitchen environment.