Jenn-Air 8101P575-60 dimensions Converting Appliance For Use With LP Gas, High Altitude Notice

Page 9

Converting Appliance For Use With LP Gas

WARNING

Propane conversion is to be performed by a JENN-AIR AUTHORIZED SERVICER (or other qualified agency) in accordance with the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction. Failure to follow instructions could result in serious injury or property damage. The qualified agency performing this work assumes responsibility for this conversion.

WARNING

Electrical power and gas must be turned off prior to conversion.

This appliance was adjusted at the factory for use with natural gas. To convert it for use with LP gas (propane or butane), both of the following modifications must be performed:

A. Replace all orifice spuds

Step 1: Remove the grates and burner heads.

Step 2: Remove aluminum venturi tube.

Step 3: Trim a small piece of masking tape to the size of a dime and affix it over the end of a 5/16￿ nut driver.

Step 4: Firmly press the nut driver over the orifice spud (figure 5) and loosen spud by turning counterclockwise. Carefully lift nut driver out of burner throat. Orifice spud should be captured in the recess. Repeat this step for each burner.

Step 5: Locate the LP orifice spud packet taped to the underside of the burner box. The spuds have small numbers stamped on the side. This number codes the orifice diameter and its correct burner location. Reference figure 6 on the next page for correct LP orifice spud location for 4 burner and 5 burner models, respectively.

Figure 5: Removal of Orifice Spud

Step 6: With the masking tape still in place in the recess of the nut driver, press an LP orifice spud into the recess so that it is snugly captured.

Step 7: Carefully install the orifice spud in the appropriate burner throat by turning clockwise to tighten. Tighten to a torque of 15 to 20 inch-lbs.

Step 8: Replace cylindrical aluminum venturi tubes. Replace burner heads and grates. Index each grate to its burner pan.

Step 9: Save the orifices removed from the appliance for future use.

High Altitude Notice

The specified gas burner ratings typically apply to elevations up to 2000 feet. For higher altitudes, the rates may need to be reduced to achieve satisfactory operation. A local certified gas servicer will be able to advise if a reduction is necessary.

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Instructions to Installer Save These Instructions for Future Reference8101P575-60 Conserve Estas Instrucciones Como Referencia Futura Instrucciones Para EL InstaladorImportant Installation Suggestions Installing Cabinetry Over Your CooktopLocation Of Your Jenn-Air Appliance Preparation Of CountertopSugerencias importantes de instalación Preparación del mostradorInstallation Of Appliance Connecting Appliance To Gas SupplyCommonwealth Of Massachusetts Conexión del electrodoméstico al suministro de gas Instalación del electrodomésticoEn el estado de Massachusetts ImportantePressure Testing Connecting Appliance To ElectricityElectrical Grounding Instructions Conexión del electrodoméstico al suministro eléctrico Pruebas de presiónInstrucciones Eléctricas DE Conexión a Tierra Converting Appliance For Use With LP Gas High Altitude NoticeReplace all orifice spuds Conversión del electrodoméstico para usarse con gas LP Aviso de altitudColoque de nuevo todos los puntales del orificio Invert Cap in Appliance Pressure Regulator Installation of LP Orifice SpudsInstallation of Natural Gas Orifice Spuds To Convert Appliance For Use With Natural GasInvert Appliance Pressure Regulator Cap Conserver CES Instructions Pour Usage Ultérieur Instructions À L’USAGE DE L’INSTALLATEURPréparation du comptoir Emplacement de la plaque de cuisson Jenn-AirPose d’armoires au-dessus de la plaque de cuisson Suggestions de pose importantesDans le Commonwealth du Massachusetts Pose de la plaque de cuissonRaccordement de la plaque de cuisson à l’électricité Vérification de la pressionInstructions DE Mise À LA Terre Conversion de l’appareil au gaz GPL Utilisation en haute altitudeRemplacer tous les bouchons-orifices Tapón Y Pasador DEL Convertidor Instalación de los puntales de orificio LPInverser le capuchon du détendeur de la plaque de cuisson Pose des bouchons-orifices pour GPLInstalación de los puntales de orificio de gas natural Pose des bouchons-orifices pour gaz naturel Conversion de l’appareil au gaz naturel

8101P575-60 specifications

The Jenn-Air 8101P575-60 is a high-performance electric cooktop that exemplifies modern culinary technology and innovative design, making it a noteworthy addition to any kitchen. This versatile appliance is engineered with advanced features that cater to both casual cooks and culinary enthusiasts, providing an exceptional cooking experience.

At the heart of the Jenn-Air 8101P575-60 is its powerful induction cooking technology. Induction cooktops use electromagnetic energy to directly heat the cookware, providing rapid heating and precise temperature control. As a result, this cooktop significantly reduces cooking time while ensuring consistent cooking results. The efficiency of induction cooking also means that heat is focused only on the pot or pan, keeping the kitchen cooler and reducing energy use.

One of the standout features of the Jenn-Air 8101P575-60 is its sleek, elegant design. The smooth glass surface not only enhances the aesthetic appeal of the kitchen but also makes cleaning effortless. Cooking spills and splatters can be easily wiped away, ensuring that your cooktop remains pristine with minimal effort.

The cooktop boasts multiple cooking zones, each equipped with varying power levels to accommodate a range of cooking tasks. From simmering sauces to searing meats, the Jenn-Air 8101P575-60 provides the flexibility to adapt to different cooking techniques. Additionally, the cooktop includes features like a built-in timer and a bridge element that allows for the combination of two cooking zones, ideal for larger cookware and more complex meals.

Safety is another critical aspect of the Jenn-Air 8101P575-60 design. It incorporates features such as an automatic shut-off function and a child lock, providing peace of mind for families with young children. These safety features ensure that the cooktop operates safely and efficiently, limiting the risk of accidents in the kitchen.

Another notable characteristic is the intuitive touch controls that allow for effortless adjustment of heat settings. Users can quickly fine-tune temperatures or switch between cooking zones with just a tap, making the cooking process smooth and efficient.

Overall, the Jenn-Air 8101P575-60 exemplifies the perfect blend of style and functionality. Its state-of-the-art induction technology, elegant design, versatile cooking options, and safety features make it a standout choice for anyone looking to elevate their culinary capabilities while maintaining a sophisticated kitchen environment.
Top Page Image Contents