Avanti M01250TW, MO1250TW Setting A Cooking Program, A. One-stageCooking, B. Multi-stageCooking

You can check the clock time while cooking is in				cancel TIMER during timing process.
progress by touching the CLOCK pad.
NOTE: ONCE THE TIME HAS BEEN SET IT WILL
CONTINUE TO SHOW UNTIL THE UNIT IS
UNPLUGGED OR POWER LOST.
			SETTING A COOKING PROGRAM
A. One-stage Cooking				B. Multi-stage Cooking
1. Use the number pads to set a cooking time.				For added convenience your oven offers the ability
	You can set a cooking time from one second to			to operate in a “Multi-Stage” cooking cycle. Each
	99 minutes and 99 seconds.			cycle or stage can be set with a separate cooking
2. If you want to set a power level other than				time and or power level.
	100% power, touch POWER, then use the				a) To set the oven in Multi-Stage cooking
	number pads to enter the power level. You can					model, simply set the time and power level
	set the power level from 1 to 9.					of the first stage (as described in Section
	Use single digits to set a cooking power level:					One-Stage Cooking to the left).
					b) To set the second cooking stage, press the
						COOK key (“MEM” will appear in the
						display window).
					c) Select the desired cooking time and power
		Number pad	Cooking power			level for the second stage.
		9	90%		d) Press “Start/MINUTE PLUS” to begin the
						cooking process.
		8	80%
		7	70%	NOTE:
		6	60%
				After cooking stage 1 has elapsed, you will hear
		5	50%
					one “beep” sound, signaling the beginning of
		4	40%		stage 2. After the total time (selected cooking
		3	30%		times for both stages) has elapsed, 4 “beeps”
		2	20%		will sound and “END” will appear in the display
					window. Touch		the “STOP/RESET” button or
		1	10%
					open the oven door to clear or end the cooking
3.	Touch START/MINUTE PLUS to start cooking.				program before starting another cooking
					function.
SPEED DEFROST				COOK BY WEIGHT
1.	Touch SPEED DEFROST.			1.	Touch COOK BY WEIGHT.
2.	Enter desired defrosting time by touching			2.	Enter the one digit			code by touching the
	correct number pads. Digital timer sets minutes
					correct number 1~3 (shown below) pad .
	and seconds from left to right so a single digit
				3.	Enter weight.
	can be set (5 for 5 seconds ) or up to 4 digits
	(2405 for 24 minutes 5 seconds).			4.	Touch START/MINUTE PLUS pad.
3.	Touch START/MINUTE PLUS.
NOTE:						Cook By Weight Code Description
After time has elapsed four signals sound and END
						CODE	TYPE	MAX WEIGHT
appears in display. Touch STOP/RESET pad or
						1	Beef	5 lb. 16 oz.
open door to clear END before starting another
cooking function. During defrosting program, the						2	Mutton	5 lb. 16 oz.
system will pause and sound beeps to remind user
						3	Pork	5 lb. 4 oz.
to turn food over, and then press START/MINUTE
PLUS to resume the defrosting.
DEFROST BY WEIGHT				Note:
5.	Touch DEFROST BY WEIGHT pad.			Weight must be in pounds and ounces.
			14