Cadco XAF-135, XAF-115 Replacement of the Fuse To replace the fuse, Reset the Safety Thermostat

Page 12

Screw the glass cover back on.

Reassemble the side rails.

2.2REPLACEMENT OF THE FUSE To replace the fuse:

Press on the cover of the fuse holder and rotate it of about 20° counterclockwise.

Remove the cover of the fuse holder.

Remove the fuse from the cover of the fuse holder.

Replace the fuse with one with an identical one.

Reposition the cover of the fuse holder.

Press the cover and rotate it about 20° clockwise.

2.3 RESET THE SAFETY THERMOSTAT

This oven is equipped with a manually resettable safety thermostat designed to protect the oven against overheating. If there is an intervention, it completely deactivates the oven to avoid permanent damage.

• To reset this device, remove the black cap positioned to the bottom of the back of the oven by unscrewing it counterclockwise, push the reset button under the cap, and replace the black cap.

• If the safety thermostat shuts your oven off, before turning your oven back on, be sure to check your entire circuit to verify that the total amps being drawn by all the appliances, lights, etc. on that circuit do not exceed the amps available on that circuit.

NOTES

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

12

Image 12
Contents Digital Classic Control Panel Models Index Instruction for the Installer Installation Preliminary OperationsCheck the Location of Installation Feet AssemblyInstallation Electrical Connection II. Instructions for the UserInstructions for the Operator Manual Mode Switching On / Switching OffUSE of Classic Control Panel Models XAF-111 & XAF-130 Select KEYTemperature Programmed ModeStart / Stop Cooking Cycle To Enter a Program Into MemoryAutomatic PRE-HEATING To View Your Cooking Parameters During the Cooking CycleStep KEY To Modify Your Cooking Parameters During the Cooking CycleProgrammed Mode III. Cooking Principles IV. Maintenance Replacement of the Fuse To replace the fuse Reset the Safety ThermostatRemove and Reattach the Door Optional Digital Convection Ovens Accessories VI. Cooking Guide Cookies Baking Temperature Temperature of the doughFat content of the dough VariablesMuffins BiscuitsBread PiesOven Fried Chicken Rotisserie Style ChickenMethod OptionsRare Roast Beef Prime Rib roast and hold methodRoast Tenderloin quick roast and serve method JusVII. Warranty Warranty Periods ALL OvensWarranty Procedures LineChefTM Digital Convection Ovens