Bloomfield 8573, 8540, 8541, 8542, 8543, 8571, 8572, 8574 owner manual Table of Contents, Specifications

TABLE OF CONTENTS

WARRANTY STATEMENT	xi
SPECIFICATIONS	1
FEATURES & OPERATING CONTROLS	2
PRECAUTIONS & GENERAL INFORMATION	3
AGENCY APPROVAL INFORMATION	3
INSTALLATION INSTRUCTIONS	4
OPERATION	6
BREWING COFFEE	8
CLEANING INSTRUCTIONS	9
TROUBLESHOOTING SUGGESTIONS	10
SERVICING INSTRUCTIONS	11
Deliming Instructions	16
EXPLODED VIEWS & PARTS LISTS	18
WIRING DIAGRAMS	22

Thank You for purchasing this Bloomfield Industries appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use, care for and maintain or repair the appliance in a manner which will ensure its optimum performance.

SPECIFICATIONS

MODEL	TYPE	WARMERS	FAUCET	VOLTS	AMPS	WATTS	POWER
							CORD
	In-Line,					1700W
8540	Automatic,	2	YES	120VAC 1ø	14.1A		NEMA 5-15P
						1400Wk
	Plumbed-In
	In-Line,					1700W
8541	Automatic,	2	NO	120VAC 1ø	14.1A		NEMA 5-15P
						1400Wk
	Plumbed-In
	In-Line,					1600W
8542		1	NO	120VAC 1ø	13.3A		NEMA 5-15P
	Pour-Over					1300Wk
8543	In-Lin,	2	NO	120VAC 1ø	14.1A	1700W	NEMA 5-15P
	Pour-Over					1400Wk
	3-Station,					1800W
8571		3	NO	120VAC 1ø	15.0A		NEMA 5-15P
	Pour-Over					1500Wk
	3-Station,					1800W
8572	Automatic,	3	YES	120VAC 1ø	15.0A		NEMA 5-15P
						1500Wk
	Plumbed-In
	3-Station,					1800W
8573	Automatic,	3	NO	120VAC 1ø	15.0A		NEMA 5-15P
						1500Wk
	Plumbed-In
	3-Station,
				115/230VAC
8574	Automatic,	3	YES		17.0A	3700W	not provided
				1ø
	Plumbed-In

kCanadian brewers are 1500W maximum.

NOTE: Beginning in late 2001, a new solenoid was introduced into this family of brewers. Early units were fitted with a metal solenoid, which may be rebuilt if required. Later units are fitted with a sealed nylon solenoid which is replaced as a unit. In this manual, units built prior to the changeover are designated as “old-style”. Units built after the changeover are designated as “new-style”.

1