PROCEDURE: Clean Tea Brewer
PRECAUTIONS: Disconnect brewer from electric power.
| Allow brewer to cool. |
FREQUENCY: | Daily |
TOOLS: | Mild Detergent, Clean Soft Cloth or Sponge |
| Bristle Brush. |
|
|
1.Disconnect brewer from electric power. Allow brewer to cool before cleaning.
2.Remove and empty dispenser.
3.Remove and empty brew chamber.
4. Remove the spray disk from the brew head: Press up on the spray disk ears, then turn the disk to the left to unlatch. Remove the gasket from inside the brew head.
5.Wipe inside of brew head and area around the brew head with a
soft clean cloth or sponge moistened with clean water.
6.Wash the spray disk in a sink using warm water and a mild detergent. A bristle brush may be used to clear clogged spray holes. Rinse the spray disk with clean water and allow to air dry.
7.Wash the brew chamber in a sink using warm water and a mild detergent. A bristle brush may be used to clean the inside. Rinse with clean water and allow to air dry. Be sure the wire rack is properly reinstalled.
8.Wipe the exterior of the brewer with a soft clean cloth or sponge moistened with clean water.
10.Reinstall the gasket INSIDE the brew head, then reinstall the spray disk.
11.Reinstall the brew chamber.
12.Clean dispenser interior and brew cover with mild detergent. A bristle brush may be used. Rinse with clean water and allow to air dry.
13.Clean sight glass with a sight glass brush.
14.Disassemble faucet to clean. Rinse and reassemble.
Procedure is complete
CLEANING
CAUTION:
Burn Hazard
Brewing and serving temperatures of coffee are extremely hot.
Hot coffee will cause serious skin burns.
CAUTION:
Electric Shock
Hazard
Do not submerge or immerse brewer in water.
IMPORTANT:
DO NOT use steel wool, sharp objects, or caustic, abrasive or chlorinated cleansers to clean the brewer.
5