Bloomfield 1090, 1091, 1092, 1093 owner manual Warranty Statement

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

WELLS BLOOMFIELD, LLC SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transporta- tion charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Wells Bloomfield, LLC

P.O. Box 280

 

Verdi, NV 89439

 

Phone: (775) 689-5707

Fax: (775) 689-5976

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

645 75908 Owners Manual E.B

SHIPPING DAMAGE CLAIMS PROCEDURE

.C.

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Wells Bloomfield cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Dual Airpot/Thermal Brewer

xi

Image 2
Contents Electronic Brew Control Warranty Statement Table of Contents ApplicabilityFeatures and Operating Controls Features & Operating ControlsPrecautions and General Information Agency Listing InformationLeveling the Unit Installation InstructionsPLUMBER’S Installation Instructions Installation Instructions ELECTRICIAN’S Installation InstructionsOperation START-UPWater Heater Electronic Features Energizing the BrewerPage POUR-OVER Operation Brewing CoffeePreparation Procedure Clean Coffee Brewer Cleaning InstructionsTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyError Detection What to Check Description Corrective ActionAccess Panels Servicing InstructionsTemperature Adjustment Servicing InstructionsRemove Tank LID Assembly Brew Time AdjustmentDripout Time Adjustment Replace Temperature ProbeReplace HOT Water Faucet Coil Replace SolenoidReplace Faucet Supply Hose Repair HOT Water FaucetController Hook-Up Replace Keypad Replace Power BoardSET Controller Jumpers Procedure Delime the Water Tank Servicing Instructions HOT Water Tank Assembly Description Used onExploded View & Parts List Electrical ComponentsInternal Plumbing Components Faucet Repair KitsCabinet Components Wiring Diagram C. Brewer Genuine Parts
Related manuals
Manual 2 pages 5.03 Kb

1093, 1090, 1092, 1091 specifications

Bloomfield 1090, 1091, and 1092 are highly regarded models in the audio equipment market, specifically designed for professional audio applications like broadcasting, live sound, and recording. These models are noted for their exceptional sound quality, robust construction, and advanced technology that cater to both novice users and seasoned audio engineers.

One of the prominent features of the Bloomfield 1090 model is its sophisticated analog circuitry. This design ensures warm sound reproduction, making it ideal for music production and studio work. The 1090 is equipped with a high-performance preamp that captures audio signals with remarkable clarity and minimal distortion. This makes it a popular choice among sound engineers who prioritize fidelity in their recordings.

The Bloomfield 1091 model builds on the foundation laid by the 1090, introducing digital signal processing capabilities. This integration allows for a range of effects and filters, offering users the flexibility to shape their sound significantly. The 1091 also features a user-friendly interface with an LCD screen that provides real-time feedback on audio levels, allowing users to make precise adjustments on the fly.

Moving on to the Bloomfield 1092, this model stands out due to its versatility and connectivity options. It supports multiple audio input formats, including XLR, TRS, and USB, making it compatible with a wide range of devices. The 1092 is designed for seamless integration into both studio and live performance environments. Its compact size and lightweight construction make it easy to transport, catering to traveling artists and production teams.

In terms of technology, all three models benefit from Bloomfield’s commitment to using high-quality components and innovative engineering. They include features such as built-in limiters, equalizers, and a robust signal routing system that enhances their performance across various applications.

Overall, the Bloomfield 1090, 1091, and 1092 models represent a significant advancement in audio technology, offering unparalleled performance, versatility, and ease of use for audio professionals. Whether in the studio or on the stage, these models deliver unmatched sound quality and reliability, making them a preferred choice for many in the audio industry.