EN
Basic controls
Setting the clock
The clock display will flash to indicate that the time shown is not correct. To set the clock, proceed as follows:
1.Select the Clock Symbol with the Parameter selection keys (not necessary if your microwave oven is first plugged in or after a power failure).
2.Set time with Plus and Minus keys.
3.Confirm the selection with the Confirmation key.
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by proceeding as follows:
1.Select the Clock Symbol with the Parameter selection keys.
2.Press and hold the Confirmation key for 3 seconds. The clock will be hidden but the dots between the hours and the minutes will flash once per second.
To show the clock again, repeat the above procedure.
Safety blocking
The oven functioning can be blocked (for example, to stop it being used by children). Proceed as follows:
1.To block the oven, press the Cancel key for 3 seconds. You will hear a sound signal and the clock display will show the word “SAFE”. The oven is blocked in this state and cannot be used.
2.To unblock the oven, press the Cancel key again for 3 seconds. You will hear a sound signal and the clock display will show the time again.
9