Lowrance electronic LVR-250 manual Acknowledgement of an Individual Incoming Call Indiv

5-2-3 Acknowledgement of an Individual Incoming Call (INDIV)

RCV: INDIV 523456789 ROUTINE ENT –> ACK

Alternating

13CHANNEL REQUEST

ESC –> EXIT

The LVR-250 EU requires the operator to manually send an acknowledgement to the request- ing radio.

Press ENT to send an acknowledgement or EXIT to cancel.

The LVR-250 US will automatically send an acknowledgement to the requesting radio within 10 seconds of receiving the call.

5-2-4 Recall the Most Recent Incoming Call (LAST)

DSC CALL INDIVIDUAL >LAST CALL GROUP

BOBBY D INDIV. ROUTINE 10:22 UTC

BOBBY D INDIVIDUAL ROUTINE >SET CHANNEL

BOBBY D INDIVIDUAL ROUTINE >SEND?

This facility is useful and used frequently.

1.Press CALL to enter DSC mode. LAST CALL is automatically selected. Press ENT to display the contact details of the most recent incoming call. Press ENT to next screen.

2.Select the working channel and press ENT. (Note: Duplex channels cannot usually be called and are automatically eliminated from the suggested call list. If the call is to a Coast Station, the radio will recognize this and select the correct channel.)

3.The radio summarizes the call details and asks for confirmation to send the call (SEND?). Press ENT to send the call, and continue as explained in Section 5-2-1.

5-2-5 Call a Group (GROUP)

DSC CALL INDIVIDUAL LAST CALL >GROUP

SELECT GROUP >RD GROUP GROUP #2 GROUP#3

RD GROUP 055554444 ROUTINE >SET CHANNEL

RD GROUP 055554444 ROUTINE >SEND?

1.Press CALL to enter DSC mode, then select GROUP. The radio displays the names of your groups.

2.Select the group that you want to call (the Group MMSI must be set before making the call). Then set the channel and continue as explained in Section 5-2-1.

Lowrance - LVR-250 Installation and Operation Instructions 37