Lowrance electronic LVR-250 manual Request the LL Position of a Buddy LL Request, All

3.Again press, ENT, then select RELAY.

4.Press ENT, the arrow is printing <INDIV RELAY>.

5.Press ENT, the INDIV RELAY menu appears, which displays the buddy entries you have saved and <MANUAL NEW> for manual number entry.

6.Set the channel and continue as explained in Section 5-2-1.

5-2-9-2 Call distress relay to all ship using the Distress Log

To make a distress relay to all ship in the log.

DSC CALL	02 SAM
ALL SHIPS	DISTRESS
CALL LOG	FLOODING
>DIST LOG

Alternating

DISTRESS

12:05 UTC 82º50.003 N 27º45.543 W

SAM

>CALL BACK DELETE RELAY

RELAY >INDIV RELAY ALL RELAY

600000201 IN DISTRESS RELAY TO:

ALL

Alternating

600000201 IN DISTRESS RELAY >SEND?

1.Press CALL to enter DSC mode, then select DIST LOG.

2.Select the entry that you want to call and press ENT. The details are displayed over two screens that alternate every 1.5 seconds.

3.Again press, ENT, then select RELAY. Then select ALL RELAY.

4.Press ENT, two alternating screens are displaying, and again press ENT to send out the call.

5-2-10 Request the LL Position of a Buddy (LL REQUEST)

DSC CALL

CALL LOG

DIST LOG

>LL REQUEST

SAM

LLREQUEST

AWAITING ACK

LL REQUEST	SAM	SAM
>SAM	LL REQUEST	LL REQUEST
TOM	>SEND?
BUDDY #3		CALLING...

1.Press CALL to enter DSC mode, then select LL REQUEST.

2.Select the buddy whose LL position you want to request then press ENT to send the request. (See Section 5-3-5 for the acknowledgement.)

3.The working channel name is displayed while the radio waits for an acknowledgement from your buddy. If there is no reply after 1 minute the radio asks if you want to retry. Continue as explained in Section 5-2-2.

40 Lowrance - LVR-250 Installation and Operation Instructions