AEG 88009 user manual Using the Detergent, Setting and Starting a, Programme, Setting mode

Page 15

ENGLISH 15

USING THE DETERGENT

A

B

 

 

 

 

 

30

M AX

 

20

4

3

2

1

 

 

 

-

 

+

 

 

 

 

C

 

 

CAUTION!

Use only detergents for dish- washers.

1.Press the release button (B) to open the lid (C).

2.Put the detergent in the compart- ment (A) .

3.If the programme has a prewash phase, put a small quantity of de- tergent on the inner part of the ap- pliance door.

4.If you use detergent tablets, put the tablet in the compartment (A).

5. Close the lid. Make sure that the release button locks into position.

 

Do not use more than the cor-

 

rect quantity of detergent. Refer

 

to the instructions on the deter-

 

gent packaging.

 

Detergent tablets do not fully

 

dissolve with short programmes

 

and detergent residues can stay

 

on the dishes.

 

We recommend that you use

 

detergent tablets with long pro-

 

grammes.

 

 

SETTING AND STARTING A

1. Open the water tap.

PROGRAMME

2. Press the on/off button to activate

 

the appliance.

Setting mode

The appliance must be in setting mode to accept some operations.

The appliance is in setting mode when, after the activation:

All the programme indicators come on.

The display shows two horizontal sta- tus bars.

If the control panel shows other condi- tions, press and hold Delay and Start at the same time until the appliance is in setting mode.

3.Close the appliance door.

4.Make sure that the appliance is in setting mode.

5.Press Program again and again un- til the indicator of the programme that you want to set comes on.

The programme duration flashes in the display.

The phase indicators of the set programme come on.

6.If you want, you can set the options.

7.Press Start. The programme starts.

Only the indicator of the phase in operation stays on.

Starting a programme without delay start

Image 15
Contents Favorit Contents Environment ConcernsVisit OUR Website for Visit the webshop at Accessories and ConsumablesCustomer Care and Service For Perfect ResultsElectrical connection Safety InformationInstallation Water connectionDisposal USEProduct Description IndicatorsDescription Control PanelDisplay Programmes Pots and pans Rinses Dry Heavy soil PrewashDelicate crockery Rinses Glassware Dry Programme Energy kWh Water l Consumption valuesExtrahygiene OptionsMultitab Function ÖKO PlusMmol/l Adjusting the Water SoftenerBefore First USE Water hardness Water softenerTurn the water hardness dial to the po- sition 1 or Manual adjustmentElectronic adjustment Filling the Salt ContainerFilling the Rinse AID Dispenser Loading the Baskets Daily USEStarting a programme without delay start Using the DetergentSetting and Starting a Setting modeOpening the door while the appliance operates Starting a programme with delay startCancelling the delay start while the countdown operates Cancelling the programmeExternal Cleaning Care and CleaningCleaning the Filters Cleaning the Spray ArmsProblem Possible cause Possible solution TroubleshootingWashing Results and Drying Results are not Satisfactory Dishes are not Filters are clogged Clean the filtersTechnical Information Capacity Place settings Page English 117928790-A-212011