AEG 88009 user manual Troubleshooting, Problem Possible cause Possible solution

Page 18

18

TROUBLESHOOTING

The appliance does not start or it stops during operation.

First try to find a solution to the prob- lem (refer to the table). If not, contact Service.

With some problems, the display shows an alarm code:

• - The appliance does not fill with water.

• - The appliance does not drain the water.

• - The anti-flood device is on.

WARNING!

Deactivate the appliance before you make the checks.

Problem	Possible cause	Possible solution
The programme	The mains plug is not con-	Connect the mains plug.
does not start.	nected in the mains socket.
	The appliance door is open.	Close the appliance door.
	You did not press Start.	Press Start.
	The fuse in the fuse box is	Replace the fuse.
	damaged.

The delay start is set.

Cancel the delay start or wait for the end of the countdown.

The appliance does	The water tap is closed.	Open the water tap.
not fill with water.
	The water pressure is too	Contact your local water au-
	low.	thority.
	The water tap is clogged or	Clean the water tap.
	there is limescale on it.
	The filter in the water inlet	Clean the filter.
	hose is clogged.
	The water inlet hose has a	Make sure that the position
	kink or a bend.	of the hose is correct.
	The anti-flood device is on.	Close the water tap and
	There are water leakages in	contact Service.
	the appliance.
The appliance does	The sink spigot is clogged.	Clean the sink spigot.
not drain the water.

The water drain hose has a kink or a bend.

Make sure that the position of the hose is correct.

After the checks are completed, acti- vate the appliance. The programme continues from the point of interrup- tion.

If the problem occurs again, contact Service.

If the display shows other alarm codes, contact Service.

Image 18

Contents Favorit Contents Environment ConcernsVisit OUR Website for For Perfect Results Accessories and ConsumablesCustomer Care and Service Visit the webshop atWater connection Safety InformationInstallation Electrical connectionUSE DisposalProduct Description IndicatorsDescription Control PanelDisplay Programmes Pots and pans Rinses Dry Heavy soil PrewashDelicate crockery Rinses Glassware Dry Consumption values Programme Energy kWh Water lÖKO Plus OptionsMultitab Function ExtrahygieneWater hardness Water softener Adjusting the Water SoftenerBefore First USE Mmol/lFilling the Salt Container Manual adjustmentElectronic adjustment Turn the water hardness dial to the po- sition 1 orFilling the Rinse AID Dispenser Daily USE Loading the BasketsSetting mode Using the DetergentSetting and Starting a Starting a programme without delay startCancelling the programme Starting a programme with delay startCancelling the delay start while the countdown operates Opening the door while the appliance operatesCleaning the Spray Arms Care and CleaningCleaning the Filters External CleaningTroubleshooting Problem Possible cause Possible solutionDishes are not Filters are clogged Clean the filters Washing Results and Drying Results are not SatisfactoryTechnical Information Capacity Place settings Page English 117928790-A-212011