CARE AND CLEANING
WARNING!
Before maintenance, deactivate the ap- pliance and disconnect the mains plug from the mains socket.
ENGLISH 17
Dirty filters and clogged spray arms decrease the washing re- sults.
Make a check regularly and, if necessary, clean them.
CLEANING THE FILTERS
C |
C |
A |
B |
A1 |
A2 |
1.Turn the filter (A) counter- clockwise and remove it.
2.To disassemble the filter (A), pull apart (A1) and (A2).
3.Remove the filter (B).
4.Wash the filters with water.
5.Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C).
6.Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks.
An incorrect position of the filters can cause bad washing results and dam- age to the appliance.
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms are clog- ged, remove remaining parts of soil with a thin pointed object.
Only use neutral detergents. Do not use abrasive products, abrasive clean- ing pads or solvents.