20
Problem | Possible cause | Possible solution |
| The quantity of detergent | Make sure that you add the |
| was too much. | correct quantity of detergent |
|
| in the dispenser before you |
|
| start a programme. |
Dry water drop | The released quantity of | Increase the released quanti- |
stains on glasses | rinse aid was not sufficient . | ty of rinse aid. |
and dishes. |
|
|
|
|
|
The quality of the detergent can be the cause.
Try a different brand of de- tergent.
The dishes are wet. | • The programme had no | For better drying results, |
| drying phase. | keep the door ajar for some |
| • The programme had a | minutes. |
| low temperature drying |
|
| phase. |
|
The dishes are wet | The rinse aid dispenser is | Make sure that there is rinse |
and matt. | empty. | aid in the rinse aid dispenser. |
| The quality of the rinse aid | Try a different brand of rinse |
| can be the cause. | aid. |
|
|
|
The quality of the combi detergent tablets can be the cause.
•Try a different brand of combi detergent tablets.
•Activate the rinse aid dis- penser and use the rinse aid together with the com- bi detergent tablets.
Activating the rinse aid dispenser with the multitab function activated
1.Press the on/off button to activate the appliance.
2.Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’.
3.Press and hold Delay and Start at the same time until the indicators (A), (B) and (C) flash.
4.Press Option .
• The indicators (A) and (C) go off.
•The indicator (B) continues to flash.
•The display shows the setting of the rinse aid dispenser.
Off
On
5.Press Option to change the setting.
6.Deactivate the appliance to confirm.
7.Adjust the released quantity of rinse aid.
8.Fill the rinse aid dispenser.
TECHNICAL INFORMATION
Dimensions | Width / Height / Depth (mm) | 596 / 818 - 878 / 580 |
Electrical connection | Refer to the rating plate. |
|
Water supply pressure | Min. / max. (bar / MPa) | (0.5 / 0.05 ) / (8 / 0.8 ) |
Water supply 1) | Cold water or hot water2) | max. 60 °C |