AEG 403 manual Installing, Positioning, Levelling, Adapting the work-top, Fitting under a counter

Page 28

Installing

Positioning

Set the machine up as close as possible to a water tap and a connection for waste water.

In order to ensure the door closes and seals properly, it is necessary for the machine to stand firmly and horizontally on the floor.

Adjust the screw feet upwards and downwards until the machine stands level.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the levelling spacers, either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Adapting the work-top

You can move the work-top 25 mm towards the front or the back so that it fits exactly up against the kitchen cabinet. To do this, loosen the two fixing screws at the rear, bring the work-top into the required position, and tighten the screws again.

IN26

570⎟

600

820

600

IN05

28

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or pre-existing top, providing the dimensions of the recess correspond to those in the picture.

Image 28

Contents Favorit Contents Safety instructions Using your dishwasher for its intended purposeBefore using your dishwasher for the first time Child safetyYour dishwasher in day-to-day use Disable the door lock so that the door no longer closes Disposing of packaging and old machineDisposing of the packaging Disposing of your old machineImportant hints Unsuitable crockerySuitable crockery Following items have certain machine washing limitationsWater hardness adjustment Central filter Levelling spacers Description of the applianceInside of the appliance Upper basket stopUse Washing programmes Type of soil Load Selector Pushbutton PositionCold prewash Before using your dishwasher for the first time Setting the water hardness rangeTo adjust the water softener Filling with special saltRinse-aid Salt refill indicatorFilling up the rinse-aid Rinse aid replenishment indicator Setting the rinse aid quantity to be addedTighten firmly the cover Adding dishwashing detergent After filling the dispenser with detergent, close the lidPhosphate free detergents with enzymes Loading your machine Lower basketCutlery basket Upper basket Set and start the programme Operating instructionsAt the end of the programme Cleaning the central filter Internal and external cleaningCare instructions Cleaning the large filter Dishwasher must not be used without filtersServicing Dishes are not clean poor wash Dishwasher will not drainDoor is difficult to close Visible lime deposits or white film on the dishesCustomer service Technical data CapacityAllowable water pressure Electrical connectionInstalling PositioningLevelling Adapting the work-topConnecting the water supply Proceed as followsMinimum water pressure Water outlet connectionMaximum allowable water pressure Extension hoses Electrical connectionAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG