AEG 403 manual Setting the rinse aid quantity to be added, Rinse aid replenishment indicator

Page 15

A

BR01

B

 

 

 

 

 

 

x

6

5

4

3

 

 

 

 

m

a

 

 

 

2

 

 

 

 

1

 

 

 

 

 

BR03

 

 

 

 

 

Rinse aid replenishment indicator

Top up with rinse aid when the rinse aid control light on the control panel flashes (approx. 70 - 80 ml).

Tighten firmly the cover.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Setting the rinse aid quantity to be added

The correct dosage of the rinse-aid should be regulated on the basis of the shine and drying results. For this purpose, set the quantity of liquid by means of the six-position selector (C) located on the inside of the filler opening (minimum quantity is position 1, maximum quantity is position 6). Use the tip of a knife or a screwdriver to rotate the selector. If drops of water or white marks remain on the crockery after it has been washed, gradually increase the dosage. If the crockery comes out with whitish, sticky streaks, reduce the dosage.

 

 

 

 

 

C

 

x

6

5

4

3

 

 

 

 

m

a

 

 

 

2

 

 

 

 

1

BR02

 

 

 

 

15

 

 

 

 

 

Image 15
Contents Favorit Contents Child safety Safety instructionsUsing your dishwasher for its intended purpose Before using your dishwasher for the first timeYour dishwasher in day-to-day use Disposing of your old machine Disable the door lock so that the door no longer closesDisposing of packaging and old machine Disposing of the packagingUnsuitable crockery Important hintsFollowing items have certain machine washing limitations Suitable crockeryUpper basket stop Water hardness adjustment Central filter Levelling spacersDescription of the appliance Inside of the applianceUse Type of soil Load Selector Pushbutton Position Washing programmesCold prewash Setting the water hardness range Before using your dishwasher for the first timeFilling with special salt To adjust the water softenerSalt refill indicator Rinse-aidFilling up the rinse-aid Setting the rinse aid quantity to be added Rinse aid replenishment indicatorTighten firmly the cover After filling the dispenser with detergent, close the lid Adding dishwashing detergentPhosphate free detergents with enzymes Lower basket Loading your machineCutlery basket Upper basket Operating instructions Set and start the programmeAt the end of the programme Internal and external cleaning Cleaning the central filterCare instructions Dishwasher must not be used without filters Cleaning the large filterServicing Visible lime deposits or white film on the dishes Dishes are not clean poor washDishwasher will not drain Door is difficult to closeCustomer service Electrical connection Technical dataCapacity Allowable water pressureAdapting the work-top InstallingPositioning LevellingProceed as follows Connecting the water supplyWater outlet connection Minimum water pressureMaximum allowable water pressure Electrical connection Extension hosesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG