AEG 95300KA-MN Operation of the cooking surface, TOUCH CONTROL sensor buttons

Page 12

Operation of the cooking surface

Operating Instructions

Operation of the cooking surface

TOUCH CONTROL sensor buttons

To operate the TOUCH CONTROL sensor buttons, place your finger flat, from above, on the desired button until the corresponding indicator illuminates, or extinguishes, or the desired function is performed.

For quicker adjustment leave your finger on the button until the desired value is reached.

All entries are acknowledged by an acoustic signal.

Switching on the appliance

Switch on the appliance using the main "On/Off" button.

The "Heat Setting/Residual Heat" display fields show .

After the main "On/Off" button has been operated to switch on your ap pliance, one of the cooking zones must be selected using the cooking zone selection buttons within approx. 10 seconds. Otherwise the appliance swit ches off again for safety reasons.

Switching off the appliance

Operate the main "On/Off" button to completely switch off the appliance.

After the individual cooking zones or the entire cooking surface have been switched off, the presence of residual heat is indicated by (as in "Hot") in the "Heat Setting/Residual Heat" display fields of the respective cooking zones.

If all cooking zones are switched off, the appliance switches off automati cally after a period of time.

12

Image 12

Contents Operating Instructions/ Installation Instructions Gebruiksaanwijzing/ InstallatieaanwijzingenMode demploi/ Instructions dinstallation Table de cuisson vitrocéramiqueDear customer CONTENT ContentPrior to Using for the first Time OPERATING INSTRUCTIONSSafety Instructions for the Installer Installing into a kitchen worksurfaceWhat to do if Cleaning and careSafety Electrical SafetyChild Safety Safety During UseSafety When Cleaning How to Avoid Damage to Your ApplianceDisposal Disposing of the packaging materialInformation on disposal Features of the hob Appliance DescriptionHeat Setting/Residual Heat display Control PanelMain On/Off button Cooking zone selectionHeat setting selection and Lock button and indicatorButton/Indicators Triple Zone/Casserole Zone Timer button and display fieldCooking zone safety switch Prior to Using for the first TimeReleasing the safety switch Initial CleaningSwitching on the appliance Switching off the applianceOperation of the cooking surface TOUCH CONTROL sensor buttonsCooking with the automatic warm up function Cooking without the automatic warm up function Locking/unlocking the control panelSwitching the triple zone on and off Switching the casserole zone on and offSetting/changing the cooking time Ending the timer function early Tables and Tips PansTips on Saving Energy Tips for cooking with and without the automatic warm up function Table Cooking and Frying potato frittersBoil up to 1.5 l of liquid vegetablesCleaning and care Ceramic GlassLight Soilage Stubborn SoilageBurnt on Soilage Stainless steel surfaceWhat to do if Remedial action in the case of malfunctionsWhat to do if the displays all go out except for the for residual heat? INSTALLATION INSTRUCTIONS Technical DataAppliance Dimensions Cut-Out DimensionsLegal stipulations, standards, directives Safety Instructions for the Installer Installing into a kitchen worksurface optimal 300 mmminimal 50 mm maximal 100 CInstallation Instructions Electrical connection verde/amarilloSERVICE PNC S-NoAEG Hausgeräte GmbH Postfach D-90327 Nürnberg 374 3560 01 / 03.00 mh