Installation
Warnings about electrical connection
lAny electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.
lBefore the appliance is connected:
1)check that the main fuse and the domestic installation can support the load;
2)check that the power supply is properly earthed in compliance with the current rules;
3)check the socket or the double pole switch used for the electrical connection can be easily reached with the appliance built in the forniture unit.
lThis hob is designed to be connected to a 230V
220 V, 60 Hz electrical supply.
lThis hob has been registered as a “Class Y” appliance according to Fire Risk Protection Regulations. It can be
lIf connecting the hob directly to the power mains, a double pole switch should be fitted, with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations. The switch should be sited within 2m of the hob and be easily accessible upon completion of the installation.
lProper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. Before any intervention, ensure the hob is disconncted from the electricity supply.
lOnce connection has been carried out, test heating elements for about 3 minutes.
lThe minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 420 mm.
lIt is not allowed to install an oven under the hob.
14