Bosch Appliances WC140 manual Rinse Aid Adjustment

Page 7

Rinse Aid

To fill the rinse aid compartment

1.Open the rinse aid compartment by turning and removing the cap as shown in figure 4.

2.Fill the rinse aid compartment until the rinse aid indicator goes dark,

as shown in figure 5 (where “a” indicates the compartment is empty, and “b” indicates the compartment is full).

3.Replace the cap, ensuring the markers on the cap line up with the compartment prior to screwing the cap back in place.

Rinse Aid Adjustment

The level of rinse aid use is preset to 4. You can adjust the level of rinse aid use by adjusting as shown in figure 6.

If water stains form on the dishes after a wash, the level should be increased.

If blue stains which can be wiped away are left on the dishes after a wah, the level should be decreased.

Please note: Rinse aid ensures better quality wash results and increased drying performance.

Always refill the rinse aid when the rinse aid indicator light on the control panel is illuminated.

fig. 4

fig. 5

fig. 6

Image 7
Contents Customer Care Department 01949 862 WC140 Integrated DishwasherCE Declarations of Conformity Appliance informationBefore first use RecommendationsControl Panel At the end of a programme Cancelling a programmeSwitching the dishwasher off Starting a programmeSalt DetergentSoftener adjustment Rinse Aid Rinse Aid AdjustmentDishwasher Baskets Programme test Standard loading and Test DataCapacity Detergent / Rinse aidPrewash No Heat P5 Programme ListingDishwasher interior Care and MaintenanceDoor seals FiltersQuick Prewash Failure Codes and TroubleshootingError description Intensive NormalProblem Failure Code and TroubleshootingPossible cause Electrical information Installation Customer Care Department 01949 862 CDA Dishwasher Oversized Fascia Door Mounting Information