Antunes, AJ MS-355, MS-250/255 owner manual Miracle Steamer Components

Page 14

A.J. Antunes & Co.

MIRACLE STEAMER

5.Examine all generator orifices (holes). If mineral deposits have formed, place a flat blade screw- driver into openings. Use a gentle twisting motion to scrape openings clean.

NOTE: If the mineral deposits come off in “flakes” or in layers, build-up is excessive.

6.Use a brass or stainless steel wire brush to remove deposits from the generator surface.

7.Pour a delimer solution (not supplied) onto the generator surface and allow to soak for one hour. Be sure to follow the delimer manufacturer’s directions for proper mixture and use.

NOTE: Use only a Aluminium safe de-liming product.

8.Remove the delimer solution from the generator and rinse with clear water to remove traces of delimer.

9.Clean the following parts in hot detergent water, then rinse in clear water and allow to air dry:

•

spatula/drawer

•

top cover

•

liner

•

steam vent

•

generator cover

•

diffuser

10. Clean steam chamber of any product spills.

11.Clean unit surface with a hot, clean, damp cloth (not dripping wet) and wipe dry.

12.Re-install all parts and fasten the generator cover.

NOTE: To ensure proper steaming characteristics, some mineral deposits must be present on generator casting. If during cleaning, the casting does become free of mineral deposits, add plain tap water to casting and allow to boil off.

NOTE: In soft water areas, it may be necessary to add a small amount of lime to generator to “season” it. This will ensure proper steaming characteristics by produc- ing a thin coating of mineral deposits on the casting.

Seasoning mixture consists of 2 ounces (59.15 milli- liters) baking soda, 2 ounces (59.15 milliliters) lime mixed with 2 ounces (59.15 milliliters) of warm tap water.

Pour the seasoning mixture into the bowl portion of the generator, turn the steamer rocker power (on/off) to ON. Once the mixture has boiled off, remove the remaining loose powder.

13. Plug in power cord and water line (if applicable).

Wingnut

Top Cover

Spatula (MS-150/250 only)

Cover

Diffuser

Steam Vent

Drawer (MS-155/255/355 only)

WADD

ATER

READY

MS-355 Shown

Liner (MS-155/255/355 only)

Drip Pan (MS-155/255/355 only)

Liner (MS-150/250 only)

Figure 8. Miracle Steamer Components

P/N 1010699 Rev. B

 

13

 

 

 

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Miracle Steamer Table of Contents Owner InformationModel Designation MS-150XX Important Safety InformationService/Technical Assistance Miracle Steamer Electrical Ratings SpecificationsElectrical Cord & Plug Configurations Voltage Watts Amps HertzDimensions Miracle SteamerUnpacking InstallationEquipment Setup Filling Water Tank-MS-150/155 Operation Model MS-250/255Operating Instructions Programming1500 Sho Hi-Limit Reset Button Steaming TipsDaily MaintenanceCleaning Steam Generator MonthlyMiracle Steamer Components Water Filters-Models MS-150/155 Direct water hook-up Units MS-250/255Troubleshooting Problem Possible Cause Corrective ActionGenerator Miracle Steamer Replacement Parts MS-150/155/250/255Item Part No Description Qty Inset a Model MS Inset B Model MS Inset C Model MS Inset B Model MS Inset a Model MS MS-355 Item Part No DescriptionInset a Model MS 79 C Inset B Model MS 69 65 Replacement Parts Part Description QtyWiring Diagrams Unless Otherwise SpecifiedAntunes & CO

MS-250/255, MS-355 specifications

Antunes is a leading manufacturer known for its high-quality commercial kitchen equipment, with a particular emphasis on foodservice solutions that enhance efficiency and performance. Among their notable products are the AJ MS-355 and MS-250/255 models, which exemplify the brand's commitment to innovation and reliability in the foodservice industry.

The Antunes AJ MS-355 is a versatile foodservice equipment piece designed for cooking and toasting items such as sandwiches, bagels, and more. One of its standout features is the advanced infrared heating technology, which ensures even cooking and consistent results. This model is equipped with dual heating elements, providing the flexibility to heat from both the top and bottom, allowing for optimal baking results that can be adjusted based on food type and desired browning.

In contrast, the MS-250/255 models are tailored for businesses that require a high volume of cooking capabilities. These models are particularly known for their compact design, allowing them to fit seamlessly into various kitchen layouts without compromising on performance. The MS-250 offers a dual-belt system that enables simultaneous cooking of multiple items, while the MS-255 takes this a step further with an additional feature that allows for the cooking of larger batches in a shorter amount of time.

Both models emphasize energy efficiency, which is crucial for modern kitchens looking to reduce overhead costs. They incorporate smart technology that not only optimizes energy consumption but also minimizes heat loss, providing operational savings and promoting sustainability. Furthermore, the intuitive digital controls on these appliances allow for precise temperature management and timing, which is essential for maintaining food quality.

Another key characteristic of the Antunes AJ MS-355 and MS-250/255 is their durability and ease of cleaning. Constructed from high-grade stainless steel, these units are designed to withstand the rigors of a busy kitchen, resisting corrosion and wear. The removable components make cleaning straightforward, ensuring that hygiene standards are met without significant downtime.

In summary, the Antunes AJ MS-355 and MS-250/255 models are exemplary pieces of equipment that embody efficiency, performance, and ease of use, making them indispensable tools for any commercial kitchen looking to enhance its cooking capabilities while maintaining quality and operational efficiency.
Top Page Image Contents