h hControlh Panels
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(8) |
CONTROL PANELS
(1)Display Window
(2)Time Pads
(3)Micro Power Pad (pg. 8)
(4)Auto Reheat Pad (pg.11)
(5)Frozen Reheat Pad (pg. 11)
(6)Turbo Defrost Pad (pg. 9)
(7)Auto Cook Pads (pg. 12)
(8)Timer Pad (pg. 13)
(7)(9) Clock Pad (pg. 7)
(10)Stop/Reset Pad
Before cooking: One tap clears your instructions.
During cooking: One tap temporarily stops the cooking process. Another tap cancels all your instructions and time of day appears in the Display Window.
(11)Start Pad
(9) |
(10) |
(11)
One tap allows oven to begin functioning. If door is opened or Stop/Reset Pad is pressed once during oven operation, Start Pad must again be pressed to restart oven.
Beep Sound
When a pad is pressed correctly, a beep sound will be heard. If a pad is pressed and no beep is heard, the unit did not or could not accept the instruction. The oven will beep twice between programmed stages. At the end of any completed program, the oven will beep 5 times.
Let’s Start To Use Your Oven!
1Plug in
Plug into a properly earthed electrical outlet. “88:88 ” will appear in the Display Window. (This will immediately cease when any pad is pressed.)
2Open Door
Open the door and place container with food on Glass Tray in the oven. Then close the door.
3Select Power Level
e.g.
Press Micro Power Pad three times. (see page 8 for Micro Power chart)
4 Set Time
e.g. 1 minute 30 seconds | once |
|
Press numbered Time Pads
three times
Verify your selection(s) in the Display Window.
5Press
– 6 –