Grundig UMS 2020 Setting the clock, Switch off or on the RDS time synchronisation, English 11­

Page 11

SETTINGS----------------------------------------------------------------------------------------------------------------------------------------

Setting the clock

The first time you connect the hi-fi system to the mains, it switches to standby.

1In standby mode, press and hold »PROG« on the remote control for 2 seconds.

– Display: »12 H« or »24 H«.

2 Press »3« or »4« on the hi-fi system or »5« or »6« on the remote control to select the hour format (12 or 24 hours) and confirm with »PROG«.

– Display: The clock digits for the hours flash.

3Select the hours with »3« or »4« on the hi-fi system or with »5« or »6« on the remote control and confirm with »PROG«.

– Display: The clock digits for the minutes flash.

4 Select the minutes with »3« or »4« on the hi-fi system or with »5« or »6« on the re- mote control and confirm with »PROG«.

– Display: the current time.

Switch off or on the RDS time synchronisation

Some RDS stations transmit an RDS time signal. If the selected RDS station transmits time infor- mation, the time is updated automatically, if you have set »CT ON«. This takes about five minutes.

1 Switch on the hi-fi system from standby mode by pressing »8« or »SOURCE«.

2Select the input source TUNER with »SOURCE« on the hi-fi system or with »TUNER« on the re- mote control.

3 Press and hold »DISPLAY« on the remote control for 2 seconds.

– Display: »CT ON« flashes.

4 Switch the RDS time synchronisation off or on with with »3« or »4« on the hi-fi system or »5« or »6« on the remote control.

Notes:

7The current time is displayed in standby mode – with reduced brightness.

7The time must be reset after a power failure or after disconnecting from the mains.

Tuning and storing radio stations

You can store up to 30 stations in the FM and 10 stations in the AM frequency range on pre- sets.

Note:

7For the best FM (VHF) reception, it is suffi- cient to direct the wire antenna accordding- ly.

Programming radio stations

1 Switch on the hi-fi system from standby mode by pressing »8« or »SOURCE«.

2 Select the input source TUNER by pressing »SOURCE« on the hi-fi system or by pressing »TUNER« on the remote control.

3 Select the desired wave range (FM or AM) by pressing »SOURCE« on the hi-fi system or »TUNER« on the remote control.

4Set the radio station by briefly pressing »3« or »4« repeatedly.

– Display: the frequency changes in steps of

50 kHz;

or

press and hold down »3« or »4« until the frequency changes to rapid run-through.

5To store the radio station, press »PROG«, se- lect preset by pressing »+ PRESET -« on the hi-fi system or by pressing »V« or »Λ« on the remote control and confirm with »PROG«.

6To search and save more radio stations, repeat steps 3 to 5.

ENGLISH 11­

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Micro Hİ Fİ System CD Mode SET-UP and Safety OverviewSettings Tuner ModeEnglish 3­ Front of the device Under the front flap in tape modeHi-fi system controls Repeat Back of the deviceOn the top ProgUBS Remote controlTIMER­ Hi-fi system displays Connect the cables marked in red to the red terminals Connecting external devicesSwitched off, data can be lost USB memory sticksHi-fi system supports SD/SDHC and MMC memory cards Connecting the headphonesInserting a memory card Removing the memory card10­ English Connecting to the mains supplyPutting batteries in the remote control Plug the power cord into the wall socketProgramming radio stations Setting the clockSwitch off or on the RDS time synchronisation Tuning and storing radio stationsAdjusting the volume Switching on and offSelecting sound settings Switching the Ultra Bass System on and offRDS information Selecting presetsSelecting the tuner input source Stereo/mono reception14­ English Selecting the CD input sourceInserting and playing CDs Searching for a passage within a track Pausing and resuming playbackRepeat actual track Selecting another trackPlaying the playlist MP3/WMA displaysProgramming track numbers Selecting and storing tracksPlaying the contents of an SD/ SDHC/MMC memory card Playing the contents of an MP3 player or a USB memory stickRecording onto cassette Selecting the cassette input sourcePlayback Fast forward and reverse searchEnglish 19­ Synchro recordingRecording from the radio Listening to an external sourceSleep Timer TimerTechnical data Cleaning the deviceCleaning the CD unit Cleaning the tape drive22­ English Environmental noteGeneral information on laser devices This device is aEnglish 23­ TroubleshootingGrundig Intermedia GmbH Beuthener Strasse 90471 Nürnberg

UMS 2020 specifications

The Grundig UMS 2020 is an innovative multi-room audio system that exemplifies the perfect blend of advanced technology and aesthetic design. This state-of-the-art platform caters to the modern audiophile, providing an immersive sound experience across various environments in the home or office. With its sleek finish and compact size, the UMS 2020 seamlessly fits into any space, while delivering high-quality audio performance.

One of the standout features of the Grundig UMS 2020 is its multi-room capability. Users can connect multiple units throughout their home, allowing for synchronized playback or independent control of sound in different rooms. This flexibility enhances the overall listening experience, making it easy to create the perfect ambiance for any occasion, from parties to quiet evenings.

The UMS 2020 employs cutting-edge audio technologies to ensure rich and clear sound. It is equipped with high-definition speakers, coupled with advanced digital signal processing (DSP) that fine-tunes audio output to suit various genres of music. The device also features a powerful subwoofer that enriches the lower frequencies, ensuring that bass-heavy tracks resonate with depth and clarity.

Connectivity is central to the Grundig UMS 2020’s appeal. The system boasts Bluetooth, Wi-Fi, and Ethernet options, allowing for seamless streaming from a variety of devices, including smartphones, tablets, and computers. It supports popular streaming services such as Spotify and Apple Music, enabling users to access a vast library of music with ease. Additionally, the UMS 2020 is compatible with voice assistants, making it convenient to control playback and settings through simple voice commands.

Another remarkable characteristic is the intuitive user interface. The accompanying mobile app provides users with comprehensive control over their audio settings, allowing them to customize equalizer settings, manage playlists, and group speakers for a synchronized multi-room experience.

The Grundig UMS 2020 is designed with energy efficiency in mind, ensuring that users can enjoy their audio experience without negatively impacting their energy consumption. Its stylish design combined with powerful performance makes it an appealing choice for anyone looking to enhance their audio experience at home or in the office.

In conclusion, the Grundig UMS 2020 is a versatile and feature-rich audio system that caters to diverse listening needs, making it a worthwhile investment for anyone passionate about sound quality.
Top Page Image Contents