Grundig UMS 2020 Switching on and off, Automatic shutdown, Selecting the input source, Muting

GENERAL FUNCTIONS----------------------------------------------------------------------------------------

Switching on and off

The only way to disconnect the hi-fi system from the mains supply is to pull out the plug from the wall socket.

1 Switch on the hi-fi system from standby mode by pressing »8« or »SOURCE« on the hi-fi sys- tem.

–The system switches to the last selected source.

Note

7If you use the remote control, you can press »8« or one of the buttons »CD«, »USB«, »SD«, »TUNER«, »CASS« or »AUX«.

2 Switch the hi-fi system to standby mode by pressing »8«.

– Display: the current time.

Automatic shutdown

If the device is in the “Stop“ position or on socket »AUX In« is no audio signal available, the de- vice switches automatically to Stand-by mode after 15 minutes. For further using switch on the device again.

Selecting the input source

1Select the input source (TUNER, CD, USB, SD, CASS, AUX ) with »SOURCE« on the hi-fi system; or by using the remote control, press one of the buttons »CD«, »USB«, »SD«, »TUNER«, »CASS« or »AUX«.

–Display: » CD«, » USB«, » CARD« » 100.60« (frequency of the radio sta- tion), » CASS« or » AUX«.

Selecting sound settings

You can choose between the preset sound set- tings FLAT, CLASSIC, ROCK, POP and JAZZ.

1Select the sound setting using »EQ« on the re- mote control.

–Display: »FLAT«, »CLASSIC«, »ROCK«, »POP« or »JAZZ«.

Switching the Ultra Bass System on and off

1 Switch the Ultra Bass System on and off by pressing »UBS« on the remote control or hi-fi system.

–Display: »«, if the UBS is activated, disap- pears if function is deactivated.

Muting

You can switch the hi-fi speakers to and from mute mode with this function.

1Activate mute with »« on the remote control.

– Display: »MUTING«.

2Deactivate mute with »« on the remote con- trol.

– Display: »MUTING« disappears.

Displaying the time

1Display the time by pressing »DISPLAY«.

2Press »DISPLAY« again to switch off the time.

Adjusting the volume

1Adjust the volume with »+ VOLUME -« on the hi-fi system; or »+« and »–« on the remote control.

–Display: briefly »VOL« from »0« to »31« then »MAX«.

12­ ENGLISH