USB AND SD/SDHC/MMC
5Press »
« to start playback with the firstfileof the first album.
–Display: elapsed playing time and informa- tion of the file appear in the display.
Note:
7To select an album, press »+« or 
« or »
« on the remote control, to select a file press »3« or »4« on the
Start playback by pressing »
«.
6Stop playback with »7/
«.
Caution:
7 Never remove memory cards during opera- tion. This can damage the memory card and the
CASSETTE MODE
Selecting the cassette input source
1Select the cassette input source with »SOURCE« on the
– Display: »CASS«.
Playback
1 Open the front flap which is marked with »OPEN« on the front panel.
2 Press »7J« to open the tape compartment.
3 Insert a cassette in the compartment with the open side facing downwards and the full reel on the left side and close the compartment.
4Press »8« to start playback.
–The button is automatically released at the end of the tape, except if pause function has been activated.
5 To pause playback press »II« and resume playback by pressing »II« again.
6 End playback with »7J«.
Note:
7The source cannot be changed while play- ing or recording a cassette.
18 ENGLISH
Fast forward and reverse search
1In stop mode, press »3« or »4«.
–»3« rewinds to the beginning, »4« fast forwards to the end.
Recording onto cassette
Erase protection
Each new recording writes over the previous re- cording.
You can protect your recordings against inad- vertent deletion by breaking the protection tab in the opening in the spine of the tape.
Purchased recordings on music tapes are al- ready protected against accidental deletion.
If you wish to record on a protected tape, seal the opening with adhesive tape.
Notes:
7Only use
7The Ultra Bass System does not affect re- cording.