Grundig UMS 2020 Connecting external devices, USB memory sticks, Switched off, data can be lost

CONNECTION AND PREPARATION----------------------------------------

Connecting the loudspeakers	Connecting an MP3 player or a
	USB memory stick
	The hi-fi system supports most MP3 players and
	USB memory sticks.
	Caution:
	7 The hi-fi system must be switched off while
	the USB connection is being made. If it is not
	switched off, data can be lost.

1 Insert the wires of the loudspeaker cable into the terminals »RIGHT+/–« and »LEFT+/–«.

–Connect the cables marked in red to the red terminals.

Connecting external devices

Note:

7Switch the hi-fi system off before you connect external devices.

1 Use standard audio adapter to connect the audio outputs of the external device to the »AUX In« (ø 3.5 mm) socket on the back of the hi-fi system.

	UMS 2020
SOURCE	UBS
PRESET	VOLUME
SD CARD	USB

1Switch off the hi-fi system by pressing »8«.

2 Connect the USB interface of the MP3 player to the »USB« socket on the hi-fi,using a stan- dard USB cable;

or

insert the USB plug of the USB memory stick in the »USB« socket on the hi-fi system.

Notes:

7To remove the MP3 player or the USB mem- ory stick, switch off the hi-fi system and pull out the cable for the data medium.

7The USB socket on the hi-fi system does not support a connection for a USB extension cable and is not designed for directly con- necting to a computer.

8­ ENGLISH