Sanyo MDF-793C, MDF-593C instruction manual Lock, Control panel cover

Page 12

FREEZER COMPONENTS

1.Lock

2.Door: Hinged type. The door can be opened in any angle on the way to full open.

3.Magnetic door gasket: Seals the door and prevents leakage of cold air.

4.Inner lid: Serves as a means of reducing cold air leakage when the door is open. Remove the frost before it is accumulated too much.

5.Access port: Serves a means of leading the measuring cable from the freezing room to the outside.

6.Caster: 4 casters are provided. They make the moving of the unit easier.

7.Leveling foot: Serves to adjust the height and to settle the frame.

8.Temperature display area: The digital temperature indicator, alarm lamp, and filter check lamp are installed.

9.Exhaust air vent: Be careful not to block this.

10.Control panel cover

11.Control panel cover lock: To lock the control panel cover to avoid the setting by accidental contact.

12.Control panel: Temperature set key, power switch and so on are installed. Refer to page 12 for details.

13.Back-up system joint (rear side): It is positioned at rear of the unit. Serves to connect with the pipelines from the liquid CO2 cylinder.

14.Side panel: For cleaning the condenser filter and condenser. The remote alarm terminal is located inside the panel.

15.Air intake vent (grille): Do not block this vent to keep the proper cooling performance.

16.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MDF-593C MDF-793C Contents Precautions for Safe Operation Symbol showsMay cause bad effect on your health or environment Maintenance. These may be harmful to your health Water Precautions for Safe Operation Page Page Environmental Conditions Freezer Components Lock Control panel coverBreak down or power failure at the power supply Control panelInstallation Installation siteInstallation Adjust the leveling footRemove the packaging materials and tapes Fix the unitOperation after power failure START-UP of UnitTemperature setting Remote alarm terminalOperating Instructions Alarm temperature setting Setting of alarm resume time Alarm and safety functions Alarm and safety functionBack-up system Rough schemeTemperature Recorder Feeding of chartReplacement of cell Setting of back-up temperature PenholderControl Panel Temperature Recorder Routine Maintenance CleaningCleaning of condenser filter Defrosting of inside wallTrouble Shooting Disposal of Unit Recycle of NICKEL-CADMIUM Battery Location of a nickel-cadmium batteryRemoval of nickel-cadmium battery Handling of batterySpecifications PerformanceSafety check sheet CEM

MDF-593C, MDF-793C specifications

The Sanyo MDF-793C and MDF-593C are advanced laboratory refrigeration models designed for a variety of applications in research, medical, and industrial settings. Both units embrace cutting-edge technologies and engineering innovations to provide reliable performance while ensuring specimen preservation and optimal storage conditions.

One of the key features of the Sanyo MDF-793C is its ability to maintain a consistent temperature range from -10 to -30 degrees Celsius. This wide range allows users to store a variety of sensitive materials, including biological samples, medications, and vaccines. The unit is equipped with a microprocessor-controlled temperature management system, which offers precise temperature monitoring and control. Additionally, the unit includes a rapid cooling system that ensures quick recovery after door openings, minimizing temperature fluctuations that can compromise stored materials.

The MDF-593C, while slightly smaller in capacity, also offers impressive temperature control and stability. It is designed to have an internal temperature range of -10 to -25 degrees Celsius. Its compact design makes it suitable for labs with limited space, without compromising performance. Both models utilize environmental-friendly refrigerants, which align with current sustainability practices and regulations.

In terms of technological advancements, both models include digital displays that provide real-time temperature readings. These displays come with alarms that notify users of any aberrations, ensuring the highest levels of monitoring and security. The integration of a high-efficiency compressor not only supports rapid cooling but also contributes to lower energy consumption, making both the MDF-793C and MDF-593C cost-effective options for long-term use.

Another standout characteristic is the robust insulation used in the construction of both units. High-density polyurethane foam enhances thermal efficiency and minimizes energy loss. This feature is essential for maintaining optimal internal temperatures while reducing the overall operational costs associated with energy consumption.

Both models also feature adjustable shelving and user-friendly designs, allowing for easy organization and access to stored items. Their durable construction ensures reliability while a sleek external design allows them to fit seamlessly into various laboratory environments.

In summary, the Sanyo MDF-793C and MDF-593C are exemplary choices for those seeking efficient, reliable, and environmentally sustainable refrigeration solutions. Their advanced technologies, coupled with user-friendly features, make them essential tools in ensuring the integrity of valuable samples across various fields.
Top Page Image Contents