Installation Site

To operate this unit properly and to obtain maximum performance, install the unit in a location with the following conditions:

ŶA location not subjected to direct sunlight

Do not install the unit under direct sunlight. Installation in a location subjected to direct sunlight cannot obtain the intended performance.

ŶA location with adequate ventilation

Leave at least 10 cm around the unit for ventilation. Poor ventilation will result in a reduction of the performance and consequently the failure.

ŶA location away from heat generating sources

Avoid installing the unit near heat-emitting appliances such as a heater or a boiler etc. Heat can decrease the intended performance of the unit.

ŶA location with little temperature change

Install the unit under stable ambient temperature. The allowable ambient temperature is between -5 and +35oC.

ŶA location with a sturdy and level floor

Always install the unit on a sturdy and level floor. The uneven floor or tilted installation may cause failure or injury. Install the unit in stable condition to avoid the vibration or noise. Unstable condition may cause vibration or noise.

WARNING

Install the unit on a sturdy floor. If the floor is not strong enough or the installation site is not adequate, this may result in injury from the unit falling or tipping over.

Select a level and sturdy floor for installation. This precaution will prevent the unit from tipping. Improper installation may result in water spillage or injury from the unit tipping over.

ŶA location not prone to high humidity

Install the unit in the ambient of 80% R.H. or less humidity. Installation under high humidity may cause current leakage or electric shock.

WARNING

Do not use the unit outdoors. Current leakage or electric shock may result if the unit is exposed to

rain water.

Never install the unit in a humid place or a place where it is likely to be splashed by water.

Deterioration of the insulation may result which could cause current leakage or electric shock.

ŶA location without flammable or corrosive gas

Never install the unit in a flammable or volatile location. This may cause explosion or fire or may result in the current leakage or electric shock by the corrosion of the electrical components.

ŶA location without the possibility of anything fall

Avoid installing the unit in the location where anything can fall down onto the unit. This may cause the breakdown or failure of the unit.

11		38

MDF-594C specifications

The Sanyo MDF-794C and MDF-594C are advanced laboratory refrigerators designed for the safe storage of biological samples, vaccines, and sensitive materials. These models stand out due to their robust construction, user-friendly features, and innovative technologies that cater to the requirements of research institutions, hospitals, and laboratories.

One of the main features of the Sanyo MDF-794C is its large capacity, which makes it suitable for facilities with high storage demands. The refrigerator can accommodate a significant volume of samples while maintaining a stable internal environment. The MDF-594C, while slightly smaller, still offers ample storage space without compromising on performance.

Both models incorporate advanced cooling technologies, including a reliable compressor system that ensures rapid temperature recovery even during door openings. They are capable of maintaining temperatures ranging from -10°C to -30°C, ideal for a variety of laboratory applications. Temperature uniformity is a crucial aspect of sample preservation, and Sanyo’s state-of-the-art design guarantees even distribution of cold air throughout the cabinet.

Energy efficiency is another notable characteristic of the Sanyo MDF-794C and MDF-594C. These models are designed to operate with minimal energy consumption, thereby reducing operational costs and environmental impact. Additionally, they are equipped with a reliable insulation system, which helps maintain consistent temperatures while minimizing energy loss.

User-friendliness is emphasized in the design of both refrigerators. They feature intuitive, programmable digital control panels that allow users to set and monitor temperatures easily. The alarms for temperature deviation and system malfunctions ensure that users are promptly alerted to any issues, enhancing safety and reliability.

Another significant feature is the inclusion of a self-diagnostic system in both models, which continuously monitors the performance of the unit. This capability aids in early detection and troubleshooting, thus maintaining optimal operating conditions.

The Sanyo MDF-794C and MDF-594C also prioritize hygiene and cleanliness, with easy-to-clean interiors that help prevent contamination. Their design allows for easy organization of samples, thus improving workflow within the laboratory.

In conclusion, the Sanyo MDF-794C and MDF-594C are exemplary laboratory refrigerators characterized by their capacity, advanced cooling technologies, energy efficiency, user-friendly controls, and commitment to sample safety. These attributes make them invaluable assets in any laboratory setting, ensuring the integrity and reliability of stored materials.