Sanyo MDF-594C instruction manual Routine Maintenance, Normal defrosting, Thorough defrosting

Page 19

ROUTINE MAINTENANCE

WARNING

Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in

order to prevent electric shock or injury.

Ensure you do not inhale or consume medication or aerosols from around the unit at the time of

maintenance. These may be harmful to your health.

Cleaning of cabinet

Clean the unit once a month. Regular cleaning keeps the unit looking new.

Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories. If the outside panels are dirty, clean them with a diluted neutral dishwashing detergent. (Undiluted detergent can damage the plastic components. For the dilution, refer to the instruction of the detergent.) After the cleaning with the diluted detergent, always wipe it off with a wet cloth. Then wipe off the cabinet or accessories with a dry cloth.

Never pour water onto or into the unit. Doing so can damage the electric insulation and cause failure.

The compressor and other mechanical parts are completely sealed. This unit requires absolutely no lubrication.

Check the back-up system by pressing CO2 back-up test switch (TEST) once a month if it is installed.

Remove the frost or ice on the chamber wall and clean the condenser filter once a month.

Cleaning of condenser filter

This unit is provided with the filter check lamp. This lamp blinks when the condenser filter is clogged. Clean the filter according to the following procedure. As a clogged filter may cause poor cooling and compressor trouble, clean it once a month.

1.The filter fitted to the grille can be removed as shown in the figure.

2.Wash it with water and dry it naturally.

3.Replace the clean filter as before.

4.Replace the grille in the basic position and check that the filter check lamp is off.

Defrosting of inside wall

Defrost the inside wall of the freezer as follows:

Normal defrosting

Remove the frost by the enclosed scraper. Take care not to damage the inside wall.

Thorough defrosting

1.Take out and transfer all the contents to another freezer or container which contains liquid CO2, liquid N2, or dry ice. Switch off the alarm and back-up system. Switch off the power switch.

2.Open the door and remove the inner lid. Leave the freezer as it is. The water remaining in the freezer compartment should be wiped up.

3.After cleaning is completed, restart the operation according to the procedure on page 13. Put back the articles into the sufficiently cooled freezer compartment.

45

 

18

 

Image 19
Contents MDF-594C MDF-793C Contents Introduction Precautions for Safe Operation Unqualified personnel may cause electric shock or fire Abnormal operation may cause electric shock or fire Precautions for Safe Operation Environmental Conditions Freezer Components Control panel cover LockControl panel Installation Site Fixing the unit InstallationAdjusting the leveling foot Removing the packaging materials and tapesSTART-UP of Unit Operation after power failureRemote Alarm Terminal Chamber Temperature SettingAlarm Temperature Setting Alarms & Safety Functions Setting of Alarm Resume TimeAlarm and safety function RED Black White Normal defrosting Routine MaintenanceThorough defrosting Handling of battery Replacement of BatteryLocation of a nickel-cadmium battery Removal of nickel-cadmium batteryMalfunction Check/Remedy TroubleshootingDisposal of Unit Recycle of batteryGerman EnglishSpanish FrenchPortuguese ItalianSwedish DutchReplacement of cell Feeding of chartPenholder Setting of back-up temperatureControl Panel Temperature Recorder Option BACK-UP System Option Performance SpecificationsSafety check sheet JK1035-150B
Related manuals
Manual 35 pages 59.46 Kb

MDF-594C specifications

The Sanyo MDF-794C and MDF-594C are advanced laboratory refrigerators designed for the safe storage of biological samples, vaccines, and sensitive materials. These models stand out due to their robust construction, user-friendly features, and innovative technologies that cater to the requirements of research institutions, hospitals, and laboratories.

One of the main features of the Sanyo MDF-794C is its large capacity, which makes it suitable for facilities with high storage demands. The refrigerator can accommodate a significant volume of samples while maintaining a stable internal environment. The MDF-594C, while slightly smaller, still offers ample storage space without compromising on performance.

Both models incorporate advanced cooling technologies, including a reliable compressor system that ensures rapid temperature recovery even during door openings. They are capable of maintaining temperatures ranging from -10°C to -30°C, ideal for a variety of laboratory applications. Temperature uniformity is a crucial aspect of sample preservation, and Sanyo’s state-of-the-art design guarantees even distribution of cold air throughout the cabinet.

Energy efficiency is another notable characteristic of the Sanyo MDF-794C and MDF-594C. These models are designed to operate with minimal energy consumption, thereby reducing operational costs and environmental impact. Additionally, they are equipped with a reliable insulation system, which helps maintain consistent temperatures while minimizing energy loss.

User-friendliness is emphasized in the design of both refrigerators. They feature intuitive, programmable digital control panels that allow users to set and monitor temperatures easily. The alarms for temperature deviation and system malfunctions ensure that users are promptly alerted to any issues, enhancing safety and reliability.

Another significant feature is the inclusion of a self-diagnostic system in both models, which continuously monitors the performance of the unit. This capability aids in early detection and troubleshooting, thus maintaining optimal operating conditions.

The Sanyo MDF-794C and MDF-594C also prioritize hygiene and cleanliness, with easy-to-clean interiors that help prevent contamination. Their design allows for easy organization of samples, thus improving workflow within the laboratory.

In conclusion, the Sanyo MDF-794C and MDF-594C are exemplary laboratory refrigerators characterized by their capacity, advanced cooling technologies, energy efficiency, user-friendly controls, and commitment to sample safety. These attributes make them invaluable assets in any laboratory setting, ensuring the integrity and reliability of stored materials.