Sanyo MDF-594C instruction manual Alarm Temperature Setting

ALARM TEMPERATURE SETTING

This unit is provided with the high temperature alarm. The setting of high temperature alarm is 10oC or 15oC higher than the setting of chamber temperature. The procedure in table 2 shows the sequence to set the high temperature alarm at 15oC higher than the setting of chamber temperature. Set the figure to 000 at step 5 when setting the high temperature alarm at 10oC higher than the setting of chamber temperature.

Note:

The alarm temperature is set at the factory 10oC higher than the setting of chamber temperature.

Table 2. High temperature alarm setting (15oC higher than the setting of chamber temperature)

	Description of operation	Key operated	Indication after operation
1		-----	The current chamber temperature is
			displayed.
2	Press the numerical value shift key		The first digit blinks.
	for about 5 seconds.
3	Set the first digit to 1 with the		The first digit blinks.
	numerical value shift key.
4	Press enter key.	ENT	The first digit blinks.
5	Set the first digit to 1 with the		When pressed, the figure of settable
	numerical value shift key.		digit changes.
			Alarm temperature is memorized and
6	Press enter key.	ENT	the current chamber temperature is
			displayed.

Note: The setting is not memorized if the temperature setting key (PV/SV) is pressed during alarm temperature setting. The chamber temperature is displayed for 3 seconds when the numerical value shift key is pressed 5 times for 5 seconds.

15 42