Samsung UN55H6400 Installing Batteries into the Samsung Smart Control, Low Battery Alarm Window

Installing Batteries into the Samsung Smart Control

The Samsung Smart Control is only available with the LED 6400 series and higher.

It may not be supported Samsung Smart Control depending on the country.

To use the Samsung Smart Control, insert the batteries into the device referring to the figure below.

111Gently pull on the notch in the battery cover. When the cover comes loose, remove the cover completely.

222Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.

333Place the battery cover on the remote control, and then press the top part of the cover into the remote control.

444Press the catches on both sides of the battery cover in the order shown in the figure above until the cover is completely attached to the remote control.

The Low Battery Alarm Window

If the Samsung Smart Control's batteries become low, the Low Battery Alarm appears on the screen. When the Alarm appears, replace the batteries. We recommend using alkaline batteries for longer operating life.

<Low battery Alarm Icon>