Samsung UN40H6350 manual Broadcasting option, Change the Use Mode Support Use Mode to Home Use

The Problem	Try this!
The Broadcasting option	Broadcasting is only available when the Source is set to TV.
	The Broadcasting menu cannot be accessed while you watch TV using a cable
has been deactivated.
	box or satellite receiver.
The settings are lost	If the Use Mode is set to Store Demo, the TV's audio and video settings are
after 5 minutes or every	automatically reset every 5 minutes.
time the TV is turned off.	Change the Use Mode (Support > Use Mode) to Home Use.
	Check the cable connections and reconnect them.
There is an intermittent	Loss of audio or video can be caused by using overly rigid or thick cables.
loss of audio or video.	Make sure the cables are flexible enough for long term use. If you are mounting
	the TV to a wall, we recommend using cables with 90-degree connectors.
There are small particles	This is part of the product’s design and is not a defect.
on the TV's bezel.
The PIP menu is not	PIP functionality is only available when you are viewing video from an HDMI or
available.	Component source on the main screen.
A POP (TV’s internal	Change the Use Mode (Support > Use Mode) to Home Use.
banner ad) appears on
the screen.
The TV is making a	The expansion and contraction of the TV's outer casing may cause a popping
popping noise.	noise. This does not indicate a product malfunction. The TV is safe to use.
	Your TV utilizes high-speed switching circuits and high levels of electrical
	current. Depending on the TV's brightness level, the TV may seem slightly
The TV is making a	noisier than a conventional TV.
	Your TV has undergone strict quality control procedures that meet our
humming noise.
	demanding performance and reliability requirements.
	Some noise coming from the TV is considered normal and is not an acceptable
	cause for an exchange or refund.