Samsung UN55H6400 Anynet+ HDMI-CEC isnt working, Anynet+ HDMI-CECfrom the list, and then a device

Anynet+ (HDMI-CEC) isn't working.

The Problem

Try this!

	Confirm that the device is an Anynet+ device. The Anynet+ system supports
	Anynet+ devices only.
	Check if the power cord of the Anynet+ device is properly connected.
	Check the cable connections of the Anynet+ device.
Anynet+ does not	Go to System and see if Anynet+ (HDMI-CEC)has been set to On.
	Check whether the TV remote control is in TV mode.
work.
	Check whether the remote control is Anynet+ compatible.
	Anynet+ may not function when some other functions are active, including Channel
	Search, Smart Hub, Start Up, etc.
	If you have disconnected and then reconnected the HDMI cable, scan for devices
	again or turn your TV off and on.
	Check if the Anynet+ device is properly connected to the TV, and then navigate to
	the System menu to see if Anynet+ (HDMI-CEC)is set to On.
	Once you have verified that Anynet + is on:
I want to start	""	On the Samsung Smart Control, press the KEYPAD button, and then select
		the TOOLS button on the On-Screen Remote. A list appears. Select Anynet+
Anynet+.
		(HDMI-CEC)from the list, and then a device.
	"" On a standard remote, press the TOOLS button. A list appears. Select
		Anynet+ (HDMI-CEC)from the list, and then a device.
I want to exit Anynet+.	Select View TV from the Anynet+ menu.
	Select a non-Anynet+ device from the Source list.
The message
"Connecting to	You cannot use the remote control when you are configuring Anynet+ or switching
Anynet+ device..."
	to a viewing mode. Use the remote control after the TV has completed the Anynet+
or "Disconnecting
	configuration or has switched to a viewing mode.
from Anynet+ device"
appears on the screen.
The Anynet+ device	You cannot use the play function when Setup is in progress.
won't play.
	Check whether the device supports Anynet+.
	Check whether the HDMI cable is properly connected.
	Go to System and see if Anynet+ (HDMI-CEC)has been set to On.
The connected device	Scan for Anynet+ devices again.
	Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the
is not displayed.
	device is connected to your TV with an HDMI cable. Some HDMI cables may not
	support Anynet+.
	If the connection is terminated because there has been a power failure or the HDMI
	cable has been disconnected, please scan for the device again.
The TV audio is not	Connect an optical cable to the TV and the receiver.
	ARC enables the TV to output digital sound via the HDMI (ARC) port.
being played through
	However, ARC is only available when the TV is connected to an audio receiver that
the receiver.
	supports ARC.