Moffat MDW 542 user manual Hints for Test Institutes, Standard place settings

Page 20

Hints for Test Institutes

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Consumption values").

Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Consumption values").

	Full load:
	12 standard place settings

Amount of detergent required:	5 g + 25 g (Type B)

Rinse aid setting:	position 4 (Type III)

Upper basket

Lower basket

Cutlery basket

20

Image 20

Contents Dishwasher Content Safety information General safetyChild safety InstallationOn-Off button End light Programme/Cancel button Control panel and functionsStarting the washing programme Programme/CancelCancel the washing programme in progress Audible signals Deactivation/activation of the audible signalsBefore the first use When using tablets that integrate rinse aid and detergentProgramme table Setting the water softener Setting the water softener manually see tableSetting the water softener electronically see table Programme/CancelSalt for the first time Filling with dishwasher saltOnly before filling with Adjusting the dosage of rinse aid Filling with rinse aidLoading cutlery and dishes Adjusting the height of the upper basket Filling with detergent Unloading the dishwasherNever try to remove the spray arms Cleaning and CareCleaning the filters Environmental concerns Something not working Wash results are not satisfactory Technical data Consumption valuesStandard place settings Hints for Test InstitutesInstallation Water connectionInlet hose Drain hoseElectrical connection Fitting under a counter LevellingService and Spare Parts Guarantee conditionsStandard guarantee conditions 08705European Guarantee ExclusionsPage Page 152952 66/0 Subject to change without notice