Installation
WARNING!
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.
WARNING!
Only use, for connection to the water mains, new
Water connection
WARNING!
The dishwasher must not be connected to open water appliances or instantaneous water heaters. This dishwasher must be fed with cold water.
CAUTION!
If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.
Inlet hose
Connect the inlet hose to a water tap with an external thread of 3/4”.
The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut.
The locknut must be correctly fitted to avoid water leaks.
Drain hose
-Connect drain hose to the sink. Secure it with the supplied hose clamp.
-Required height: 30 to 100 cm above bottom of the dishwasher.
-If you use a drain hose extension the total length should not be longer than 4 metres. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.
21