Audible signals

Audible signals have been introduced to help indicate which operations the dishwasher is performing.

-end of the washing programme,

-malfunction of the appliance.

Factory setting: audible signals activated.

Deactivation/activation of the audible signals

1.The dishwasher must be switched off. Switch on the dishwasher by pressing the On-Off button.

5.To deactivate the audible signals, press the Programme/- Cancel button, the End light turns off indicating that the audible signals have been deactivated.

2.Press and hold

Programme/Cancel button until programme light 1 flashes and programme light 2 illuminates with fixed light.

6.To memorise the operation, switch off the dishwasher by pressing the On-Off button.

3.Press

Programme/Cancel button again: programme light 1 becomes fixed and programme light 2 starts flashing.

7.To reactivate again the audible signals, follow the instructions till point 4. Wait a few seconds and then press the

Programme/-Cancel button, the End light illuminates indicating that the audible signals have been reactivated.

4.After a few seconds programme light 1 turns off, programme light 2 goes on flashing and End light illuminates with fixed light.

The illumination of the End light means that the audible signals are active.