IV. Electric Supply for GAS Heated Ovens

SECTION 2 INSTALLATION

III.ELECTRICAL CONNECTION INFORMATION FOR PS528-SERIES OVENS.

WARNING

Authorized supplier personnel normally accom- plish the connections for the ventilation system, electric and gas supplies, as arranged by the customer. Following these connections, the factory-authorized installer can perform the initial startup of the oven.

Check the oven data plate (Figure 2-10) before making any electric supply connections. Electric supply connec- tions must agree with data on the oven data plate.

NOTE: The electric supply installation must satisfy the requirements of the appropriate statutory authority, such as the National Electrical Code (NEC), ANSI/NFPA70, (U.S.A.); the Canadian Electrical Code, CSA C22.2; the Australian Code AG601; or other applicable regula- tions.

A fused disconnect switch or a main circuit breaker (customer furnished) MUST be installed in the electric supply line for each oven; it is recommended that this switch/ circuit breaker have lockout/tagout capability. The electric supply connection must meet all national and local electrical code requirements. Copper is the recommended material for the electrical supply conductors.

Power requirements for gas heated ovens are 208 - 240VAC, 1-phase, 3-wire (2 ‘hot’, 1 ground). Electrical connection is made through a cord and plug. Using flexible cable(s) for the electrical power supply conductors requires a 2″ (51mm) strain-relief fitting (not furnished) to enable safe access to the terminal block from which oven power is distributed.

The supply conductors must be of the size and material (copper) recommended to provide the current required; (refer to the data plate for the ampere specifications). The electric current rating for each conductor supplying a PS528-Series Oven is 1.5A.

ELECTRICAL

INLET

GAS INLET

Figure 2-11. Junction Connection Box

Figure 2-10. Typical Electric Oven Data Plate

PS528G specifications

The Middleby Marshall PS528G is a cutting-edge gas-fired conveyor oven, designed to revolutionize the way food is cooked in high-demand commercial kitchen environments. Renowned for its exceptional performance, this oven combines advanced technology with user-friendly features, making it a preferred choice for restaurants, pizzerias, and other food service operations.

One of the standout features of the PS528G is its impressive cooking capacity. With a spacious cooking chamber and a conveyor belt that ensures uniform movement of food items, this oven can handle a variety of menu items all at once. This is particularly beneficial for establishments with high volume requirements, as the efficient design allows for consistent results and quick turnaround times.

The PS528G utilizes advanced jet air technology, which circulates hot air throughout the cooking chamber. This ensures even cooking and browning of food, eliminating cold spots and ensuring that every item comes out perfectly cooked. The enhanced air flow not only improves cooking quality but also reduces the cooking time compared to traditional ovens.

Energy efficiency is another highlight of the Middleby Marshall PS528G. The gas-fired system is engineered to optimize fuel consumption, making it both environmentally friendly and cost-effective. Operators can expect significantly lower energy bills without compromising on cooking performance, making this oven an ideal investment for busy kitchens.

Moreover, the PS528G features a user-friendly digital control panel. This intuitive interface allows operators to easily set cooking temperatures, adjust conveyor speeds, and monitor cooking cycles with precision. The programmable features enable users to save recipes, ensuring consistency across batches and streamlining kitchen operations.

Safety is also a top priority with the PS528G. The oven is equipped with safety features such as a reliable ignition system and temperature controls that prevent overheating, reducing the risk of accidents in busy kitchens.

In conclusion, the Middleby Marshall PS528G is a powerhouse in the realm of commercial cooking. Its combination of high cooking capacity, advanced jet air technology, energy efficiency, user-friendly controls, and safety features make it an essential tool for any food service operation that demands high-quality cooking in a fast-paced environment. As the culinary landscape continues to evolve, the PS528G stands as a testament to innovation and reliability in the kitchen.