| |
Contents |
|
Introduction | 3 |
Notes and warnings | 3 |
Notes on the Operating Environment | 4 |
Connection of Microphones | 5 |
About the manual | 6 |
Batteries and power | 6 |
Accessories, etc | 7 |
About the case | 7 |
Features and panel items | 9 |
Left side (viewed from front) | 9 |
Right side (viewed from front) | 10 |
Front panel | 12 |
MS operation | 15 |
AES/EBU output | 15 |
Expansion | 16 |
Attaching and detaching units | 16 |
Specifications | 17 |
Audio specifications | 17 |
Other parameters | 18 |
Audio performance | 18 |
Power and general specifications | 19 |
Block diagram | 20 |
About Kamesan | 22 |
Connection of Microphones
WARNING
Connection of microphone cables and microphones: to prevent hazard or damage, ensure that only microphone cables and microphones designed to the IEC
Connexions des microphones et de leurs câbles: pour éviter tout endommagement, s’assurer de brancher uniquement des microphones et des câbles de microphones conçus selon la norme IEC
When using microphones, make sure that the phantom power is set appropriately for the microphones. Use of +48 V phantom power with microphones not designed for this may result in damage to the microphones, and to the Kamesan
In the event of encountering problems with the Kamesan KS- 342, you should contact your local
5