Fisher-Price N9326 manual Problems & Solutions, low battery icon, Transmitter power L.E.D

Problems & Solutions

Problem		Solution
Receiver beeps and displays		Battery pack in receiver is weak or dead. Use AC adaptor as
low battery icon	on screen	power source and to charge the battery for four hours.
Transmitter power L.E.D.		Transmitter power is off. Turn transmitter power on.
does not light
		Loose power cord connection and transmitter power is off.
		Check transmitter power cord plug-to-outlet connection.
		No power to wall outlet and transmitter power is off. Make sure
		light switch that controls power flow to wall outlet is on.
		Power is off because circuit breaker for baby’s room is off.
		Make sure house fuses and circuit breakers are on.
You can hear conversations or		There is signal interference due to other nursery monitors on
sounds from other homes		same channel or cordless telephone use. You may need to pair
		the receiver and transmitter. Remove the receiver battery door
		and press the pairing button with a paperclip. The power LED
		will blink when the pairing button is released. Then, turn over
		the transmitter and press the pairing button with a paperclip.
		The signal L.E.D. on the receiver will flash and you will hear
		a confirmation tone.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Fisher-Price®.

28