Problems & Solutions
Problem |
| Solution | |
No image on receiver screen | Press the video screen on/off button. You can also change the | ||
| voice activated setting to | . The video screen automatically | |
| turns on when baby makes noise. | ||
|
| ||
| Batteries in receiver are weak or dead. Use AC adaptor as power | ||
| source and to charge the battery. | ||
|
| ||
| Transmitter camera lens is obstructed. Adjust the camera | ||
| angle on the transmitter. |
| |
|
| ||
Receiver beeps and out of range | Receiver is out of range of transmitter. Move receiver closer | ||
screen displays | to transmitter. |
| |
| Note: Range varies depending on surrounding conditions such | ||
| as noise levels, physical obstructions and signal interference. | ||
| Under optimal conditions, the range is up to 400 feet. | ||
|
| ||
| Transmitter power is off. Turn transmitter power on. | ||
|
| ||
| Loose power cord connection and transmitter power is off. | ||
| Check transmitter power cord | ||
|
| ||
| No power to wall outlet and transmitter power is off. Make sure | ||
| light switch that controls power flow to wall outlet is on. | ||
|
| ||
| Power is off because circuit breaker for room is off. Make sure | ||
| house fuses and circuit breakers are on. | ||
|
| ||
Receiver power L.E.D. | Receiver power is off. Turn receiver power on. | ||
does not light |
|
| |
Battery pack in receiver is weak or dead. Use AC adaptor as | |||
| |||
| power source and to charge the battery for four hours. | ||
|
| ||
| Power is off because circuit breaker for room is off. Make sure | ||
| house fuses and circuit breakers are on. | ||
|
| ||
| No power to wall outlet and power is off. Make sure light switch | ||
| that controls power flow to wall outlet is on. | ||
|
|
| |
27