Tektronix 750 manual Symptom Pieces of print image missing all four colors, Replace Fuser

Symptom: Pieces of print image missing all four colors

1.Pieces of the printed image are missing and reappear out of place, approximately 129 mm (5 in.) down the page.

33100-67

2.Media frequently wraps around the Fuser (Jam at C).

Solution:

1.Choice of media; check the following:

■

■

■

Use appropriate media in the correct tray location; refer to page 13 through page 28.

Print 10-20 blank pages of plain paper.

To avoid jams with Tektronix Transparencies, make sure that the logo strip is loaded face-downfor the Multi-Purpose Tray and face-upfor the Transparency tray.

2.If Jam at C, clear the media jam and run the front panel’s Clean for Smudges cleaning routine (5 blank pages will print to clean the roller). Press OK and then press Confirm.

3.Replace Fuser.

46 Phaser 750 Color Printer