Solution | Tektronix 750 instruction

Solution:

1.Choice of media; check the following:

■ Use Tektronix media.

■

■

Use the correct media tray for the media you are using.

When using the Multi-Purpose Tray, select the correct media in the front panel.

2.Relative humidity may be too low (below 30 percent relative humidity).

■Refer to Calibrate for Paper in the printer’s front panel and run this mode:

■Press Help, scroll to Print Quality, press Menu, scroll to Calibrate for Paper, press Menu, print the references pages. Follow the instructions on these pages and adjust the transfer setting.

3.Replace imaging unit or transfer kit.

User Guide

45

Image 56

Tektronix 750 manual Solution

Contents

L O R P R I N T E R Phaser 750 Color Printer User Guide Page Page Warranty Printer Warranty Consumables Warranty Page User safety summary Terms in manual Symbols as marked on product Contents Phaser 750 Color Printer Tektronix Supplies and Accessories Supplies High Capacity Toner Cartridges Standard Toner Cartridges Fuser Roll and Cleaning Pad Fuser Imaging Unit Transfer Kit Tektronix Color Laser Labels Tektronix Professional Printing PaperTektronix Transparency Film Paper Trays Transparency TraysPrinter Station Internal Hard Drive Additional memory Automatic Duplex/Lower Tray AssemblyPhaserShare Token Ring Network Card Print Quality Modes Fast Color Features TekColor Color Corrections Paper Tips Paper Tips Letterhead Supported page sizes and image area Trays Paper and Transparency TraysPaper Tray Transparency Tray Loading Paper or Transparency Tray Maximum Tray Level Multi-Purpose Tray Multi-Purpose TrayOverview Thin Normal Thick Loading the Multi-Purpose Tray Tektronix Transparency Tektronix Glossy Coated Paper Tektronix Premium Cover PaperTektronix Color Laser Label Paper Envelope #10 Paper 2nd SideHeavy Paper Special Media Loading Special MediaTektronix Transparencies 0236-13 Printing #10 Envelopes Envelopes Envelope Guidelines for envelope printing Printing on Tektronix Color Laser Labels At the printer Application Labels Guidelines for printing on labels Automatic 2-Sided Printing Sided Prints 0632-28 Windows NT4 Start/Settings/Printers PC Drivers Windows 95/ WindowsClick Properties Click Print on 2-Sides option Macintosh Drivers LaserWriter Select Print on Both Sides Manual 2-Sided Printing From the Multi-Purpose Tray Side 3 4 5 6 3 4 5 6 Troubleshooting Print Quality Replace the Toner Cartridge Print Quality Agenta Symptom Problem in one color only Solution Adjust the color density Replace the Toner Cartridge of the color that has problems Symptom Problem in all four colors Solution Replace Imaging Unit, or Fuser, or Fuser Roll Symptom All four colors are solid black Symptom All four colors are extremely faded Solution Symptom Pieces of print image missing all four colors Replace Fuser Media Jams Preventing media jamsJam-Wrong Media Jams Jam at a Jam at B Lower Tray Assembly Only Jam at C Remove the jammed media from the Fuser Jam at D Open the front door and the right side door Jam at E Jam at Multi-Purpose Tray Jam at Duplex Unit Re-insert the Duplex Unit into the printer’s upper slot Printer CD-ROM Getting HelpFront panel Help button PhaserLink Software Tektronix web siteTekSMART Knowledge Base Getting Help Customer Support Centers Other online servicesColor Connection Color Density Controlling Color DensityPrint and use the Color Reference Color Density Printed on recycled paper