Vertex Standard manual Introduction, Purpose of the 7122B/7133B Manual, System Hardware

Page 5

INTRODUCTION

1.0INTRODUCTION

1.1The Purpose of the 7122B/7133B Manual

The purpose of this manual is to provide the user with the information necessary to install and operate the Vertex Model 7122B/7133B Antenna Control Unit (ACU). This manual contains only the information related to the 7122B/7133B ACU and contains only limited information about the antenna structure or other equipment peripheral to the 7122B/7133B.

1.2 General Information about the 7122B/7133B ACU

The 7122B/7133B controller series is designed for applications requiring high reliability and low cost. The readout system provides 0.02E resolution, using brushless 2.5 KHz resolvers. The motor drive circuit provides the operator with single speed, real-time drive control.

The 7133B controls the elevation and azimuth movement of the antenna and the polarization movement of the feed horn. The 7122B controls only the elevation and azimuth movement of the antenna. Otherwise, the 7122B and the 7133B are identical.

1.2.1 System Hardware

The 7122B/7133B controller consists of the following subsystems:

·Model 7122B/7133B ACU

·Model 7122B/7133B OU

·Resolver

7122 and 7133 are Vertex's basic system model numbers. ACU is the acronym for antenna control unit, which refers to the 19-inch rack-mountable unit used in the shelter or other antenna control room. OU is the acronym for outside unit, which refers to the weather-proof cabinet typically installed near the antenna.

The ACU interfaces with starters and motors for elevation, azimuth, and polarization positioning of the antenna. The elevation, azimuth, and polarization limit interfaces are normally closed switches that open upon engagement.

1.2.1.1 7122B/7133B ACU

The primary components of the 7122B/7133B ACU are:

·Front Panel

1 - 1

Image 5
Contents April CG-1045Proprietary Notice Please Read the Following Precautions Table of Contents Purpose of the 7122B/7133B Manual IntroductionGeneral Information about the 7122B/7133B ACU System Hardware1.2 7122B/7133B OU Drive Cabinet Mechanical Installation Antenna Mounted Components Installation and Initial SET-UPInstalling the 7122B/7133B ACU OverviewB Antenna Control System Block Diagram Shows the connections between the ACU and the OU Resolvers are connected as shown in Table Display Offset Adjustment7122B/7133B OU Operation7122B/7133B ACU 7122B/7133B OU Controls Function 1 7122B/7133B OU ControlsPreliminary Information Acceptance Test ProcedureMaintenance Mode Remote Mode ATP Recommended Spares Engineering Drawings Crlf Appendix a Acronyms and AbbreviationsFLT PCB Appendix B Technical Support Model FAX 903

7122B, 7133B specifications

The Vertex Standard 7133B and 7122B are professional-grade handheld two-way radios designed for reliable communication in demanding environments. These models are part of the Vertex Standard line, known for their robust build quality and exceptional performance in various industries, including construction, hospitality, and event management.

One of the primary features of the 7133B and 7122B is their compact and lightweight design, making them easy to carry and use for extended periods. They both boast a rugged construction that meets military standards for durability, ensuring they can withstand harsh conditions and rough handling. This toughness is complemented by resistance to dust and water, making them suitable for outdoor use in challenging weather.

In terms of technology, both models are equipped with a powerful 5-watt transmitter, providing extended communication range and clear audio quality. The radios support multiple channel options, allowing users to communicate over designated frequencies seamlessly. This multi-channel capability is essential for organizations that require secure and private communication.

The 7133B incorporates advanced digital signal processing (DSP) technology, enhancing audio clarity even in noisy environments. This ensures that users can communicate effectively without the interference that often plagues traditional analog systems. The 7122B features a similar audio enhancement system, making it suitable for venues where background noise is prevalent.

User-friendliness is a key characteristic of these radios. Both models come with an intuitive interface, complete with an easy-to-read display and programmable buttons that allow for quick access to frequently used functions. The built-in scanning functionality enables users to monitor multiple channels effortlessly, ensuring they are always in touch with their team.

Additionally, battery life is optimized for prolonged use, with both models featuring high-capacity rechargeable batteries. This ensures that users can depend on their radios throughout long shifts without worrying about battery depletion.

In conclusion, the Vertex Standard 7133B and 7122B are ideal solutions for professionals seeking reliable and durable communication tools. With their advanced features, rugged design, and user-friendly interfaces, these radios meet the demands of various work environments, ensuring efficient communication and enhanced productivity. Whether for coordinating teams on-site or ensuring security in events, both models stand out as excellent choices for effective communication solutions.