Getting Started, Choose a Location | Black & Decker TROS1000

GETTING STARTED

•Remove all packing material, labels and any stickers.

•Remove and save literature.

•Unpack mounting parts and set them aside in a safe place where they will not roll away or get lost.

Important: Do not attempt to operate appliance until it is properly installed.

CHOOSE A LOCATION

When choosing your location, consider the following:

•DO make sure to mount within reach of an electrical outlet.

•DO consider your normal work patterns in the kitchen when choosing location.

•DO NOT mount over any heating or cooking appliance such as your range or oven.

Note: Do not install closer than 4 inches to any vertical surface or to any horizontal surface beneath the unit.

•DO NOT mount over or near a sink.

•DO NOT mount under, in front of or behind any under-cabinet light fixtures.

Note: If you are mounting multiple †SpaceMaker™ appliances, they should not be mounted flush to one another. Allow at least 4” of space between appliances for adequate cooling.

Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!

Caution: When selecting a location for your toaster oven, make sure you have adequate room to reach the Rear Receptacle.

Note: If you are connecting another †SpaceMaker™ appliance into the Save-A- Plug™ outlet, make sure you can easily unplug the appliance after each use.

DETERMINE CABINET TYPE

Prior to taping the mounting template and beginning to drill your holes, determine if your cabinet has a flat bottom (B) or an overhang molding (C). If your cabinet is flat, follow STANDARD INSTALLATION; if the cabinet has an overhang molding, refer to OVERHANG MOLDING INSTALLATION.

STANDARD INSTALLATION (FLAT CABINET)

Important: Always wear protective glasses or goggles to prevent injury when drilling.

1.Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.

2.Clean both the underside and topside of the bottom panel of the cabinet.

3.With cabinet doors open, place mounting template flush against the surface of the underside of your cabinet, making sure to align thick line on template with bottom front edge of your cabinet (D).

Important: Do not align screw holes on template directly under the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.

4.Fold the template along the edge of your cabinet so the thick line is straight with bottom front edge; pull template tight and tape down to hold in place.

5.Drilling from under the cabinet up, drill holes through the 4 places marked on the template, using a ¼-inch drill bit (E).

Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

6.Once holes are drilled, remove tape and mounting template.

7.Wipe dust and debris off the topside and underside of the cabinet surface.

8.Place a washer inside the cabinet over each of the 4 holes you drilled.

TROS1000, TROS1000Q specifications

The Black & Decker TROS1000 and TROS1000Q are versatile toaster ovens that stand out in the crowded kitchen appliance market due to their combination of functionality, efficiency, and user-friendly design. Catering to a wide range of cooking needs, these toaster ovens are perfect for those who desire a compact yet powerful cooking solution.

One of the most notable features of the TROS1000 is its capability to function as a traditional toaster, broiler, and oven in one unit. With a spacious interior, it accommodates a variety of dishes, including toast, bagels, frozen pizzas, and even casseroles. The TROS1000Q, a slightly upgraded version, includes additional functionalities catering to more specific cooking preferences.

Both models are designed with a 120-minute timer, allowing users to set cooking times with precision, thereby ensuring perfectly cooked meals and snacks. The unit's adjustable temperature control enables a range of cooking techniques, from creating crispy toasted bread to achieving a perfectly baked cake. This flexibility makes the TROS1000 and TROS1000Q ideal for any kitchen, big or small.

Another key feature is the Quik-Toast technology that offers enhanced efficiency during the toasting process, providing quicker, evenly browned results. This technology is especially beneficial for busy households where time is of the essence.

The ergonomic design of the TROS1000 and TROS1000Q includes easy-to-use dials, making it simple for anyone to operate, from novice cooks to seasoned chefs. The unit also boasts a non-stick interior, which simplifies the cleaning process, allowing for easy maintenance after cooking.

Safety is paramount in kitchen appliances, and both models include a cool-touch exterior, ensuring users can handle them without the risk of burns. The included crumb tray adds to the convenience, as it collects crumbs and spills, further promoting cleanliness.

In summary, the Black & Decker TROS1000 and TROS1000Q are versatile, efficient, and user-friendly toaster ovens. Their innovative features, such as Quik-Toast technology, adjustable temperature control, and a spacious interior, make them excellent additions to any kitchen. With a focus on safety and ease of use, these toaster ovens cater to the modern-day cook's needs, providing exceptional results without compromising on convenience. Whether for quick breakfasts or elaborate dinners, the TROS1000 and TROS1000Q deliver consistent performance and versatility.