Determine Cabinet Opening

Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors.

If needed, see website for animated representation of this step. Visit www.maytag.com/electrical under FAQ tab.

Tighten strain relief screws to secure cord.

Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use ¹⁄₄" hex-head socket, nut driver or Torx® T20® screwdriver and previously removed screw to secure cover.

NOTE: Do not plug into outlet until instructed to do so.

Measure height of cabinet opening from underside of countertop to floor where dishwasher will be installed (you will need to measure the lowest point on the underside of the countertop and the highest point on the floor). Refer to “Dishwasher Height Adjustment Chart” for wheel position and the number of turns needed.

NOTE: If the minimum cabinet opening height is less than 34" (86.4 cm), the rear wheels can be removed for additional clearance. This will allow the dishwasher and perforated section of the insulation blanket to fit into a 33¹⁄₂" (85.1 cm) high cabinet opening, but the dishwasher will be more difficult to move. Measurements are approximate. Wheels and legs are preset at the factory for 34¹⁄₂" (87.6 cm).

W10649077A specifications

The Maytag W10649077A is an innovative appliance designed to meet the needs of modern kitchens while providing unmatched reliability and performance. This model is particularly noteworthy for its advanced features and technologies that cater to user convenience and superior cleaning capabilities.

One of the standout features of the Maytag W10649077A is its robust construction, built with stainless steel components that not only enhance its durability but also provide a sleek aesthetic that fits well in any kitchen decor. This model includes a spacious interior, allowing for the effective organization of dishes, pots, and utensils, accommodating everything from everyday dishes to larger cookware.

The incorporation of PowerBlast technology significantly improves the cleaning performance of this appliance. This powerful feature utilizes pressurized jets, increased heat, and heightened wash action to remove stubborn food particles and residues, ensuring every dish comes out sparkling clean. This technology is especially effective against dried-on or baked-on food, making it an ideal choice for hard-working households.

In terms of energy efficiency, the Maytag W10649077A boasts an Energy Star rating, reflecting its commitment to reducing energy consumption without sacrificing performance. This model is designed to minimize water usage while maximizing the effectiveness of each wash cycle, contributing to lower utility bills and a more eco-friendly home.

Another noteworthy characteristic is the noise reduction technology implemented in this model. The Maytag W10649077A operates quietly, making it suitable for open-concept homes or late-night use without disturbing the household's peace. This feature allows users to run the dishwasher without the annoyance of loud operational sounds.

The user interface of the Maytag W10649077A is designed for simplicity and ease of use. It features intuitive controls that allow users to select from multiple wash cycles and customize settings tailored to their specific cleaning needs. Whether it’s a quick wash for lightly soiled items or an intensive cycle for heavily soiled pots and pans, this appliance delivers versatility for all dishwashing scenarios.

In summary, the Maytag W10649077A stands out in the crowded appliance market due to its advanced features, durability, energy efficiency, and user-friendly design. This model exemplifies Maytag's commitment to quality and innovation, making it a reliable choice for consumers seeking a powerful and efficient dishwasher capable of handling the demands of any kitchen.