Determine Cabinet Opening

Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors.

If needed, see website for animated representation of this step. Visit www.maytag.com/electrical under FAQ tab.

Tighten strain relief screws to secure cord.

Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use ¹⁄₄" nut driver or Torx® T20® screwdriver and previously removed screw to secure cover.

NOTE: Do not plug into outlet until instructed to do so.

Measure height of cabinet opening from underside of countertop to floor where dishwasher will be installed (you will need to measure the lowest point on the underside of the countertop and the highest point on the floor). Refer to “Dishwasher Height Adjustment Chart” for wheel position and the number of turns needed.

NOTE: If the minimum cabinet opening height is less than 34" (86.4 cm), the rear wheels can be removed for additional clearance. This will allow the dishwasher to fit into a 33⁷⁄₈" (86 cm) high cabinet opening, but the dishwasher will be more difficult to move. (Measurements are approximate. Wheels and legs are preset at the factory for 34¹⁄₂" [87.6 cm].) If the minimum cabinet opening height is 33³⁄₄" (85.7 cm), a section in the insulation blanket can be removed by cutting along the perforation.

W10532762A specifications

The Maytag W10532762A is a innovative appliance designed to enhance the efficiency and effectiveness of laundry processes, standing out in the competitive landscape of washer and dryer technologies. This model incorporates several advanced features tailored to meet the demands of modern households, ensuring that laundry days are less of a chore and more streamlined.

One of the standout features of the Maytag W10532762A is its powerful Agitator. The design of the agitator is engineered to deliver a robust washing performance by providing maximum cleaning action, ensuring that tough stains are removed efficiently while protecting fabrics. This means that even the most heavily soiled clothes can be cleaned thoroughly, saving time and effort in the process.

Another significant characteristic is the large capacity drum, which allows users to wash larger loads in a single cycle. This is particularly beneficial for families or individuals who have frequent laundry needs, as it reduces the number of cycles required, ultimately saving both time and energy. The machine's design also incorporates strategic placement of wash basket to reduce friction and minimize wear on fabrics.

The Maytag W10532762A also employs advanced washing technology with its PowerWash cycle. This feature is designed to tackle tough stains and deliver a thorough clean, ensuring that laundry comes out fresher and cleaner than ever. This cycle is complemented by a selection of customizable wash settings, allowing users to choose the best option for their specific laundry needs.

For efficiency and energy savings, the Maytag W10532762A is built with energy-saving features, such as a high-efficiency water usage design. This ensures that the appliance uses only the necessary amount of water, helping to conserve resources without compromising performance.

Additionally, the machine is designed with durability in mind. It comes equipped with robust components, providing users the peace of mind that their investment will stand the test of time, even with frequent use. Maytag’s reputation for reliability is well-reflected in this model, making it a valuable addition to any laundry room.

In summary, the Maytag W10532762A combines powerful cleaning capabilities, large capacity, advanced technologies, and energy efficiency, making it a top choice for anyone looking to enhance their laundry experience while ensuring that their clothes are treated with care. With the integration of smart features and a user-friendly design, it’s positioned as a leader in modern washing appliances.