Maytag W10300218B Electrical Requirements, Drain Requirements, If direct wiring dishwasher

Page 6

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

GROUNDING INSTRUCTIONS

■For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

■For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal, permanent wiring system, or an equipment- grounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead on the dishwasher.

SAVE THESE INSTRUCTIONS

Contact a qualified electrician.

Ensure that the electrical installation is adequate and in conformance with all national and local codes and ordinances.

You must have:

■120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply.

■Copper wire only.

We recommend:

■A time-delay fuse or circuit breaker.

■A separate circuit.

If direct wiring dishwasher:

■Use flexible, armored or nonmetallic sheathed, copper wire with grounding wire that meets the wiring requirements for your home and local codes and ordinances.

■Use strain relief method provided with house wiring junction box or install a UL Listed/CSA Approved clamp connector to the house wiring junction box. If using conduit, use a

UL Listed/CSA Approved conduit connector.

If connecting dishwasher with a power supply cord:

■Use Power Supply Cord Kit (Part Number 4317824) marked for use with dishwashers. Kit contents include:

■Voltex, Inc., UL Listed 16-gauge 3 wire power supply cord with 3 prong grounded plug.

■Neer C-500 ⁷⁄₈" strain relief.

■3 wire connectors.

■Part Number 302797 grommet.

Follow the kit instructions for installing the power supply cord.

■Power supply cord must plug into a mating three prong, grounded outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

IMPORTANT: If you plan to install a garbage disposer, an additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply is required.

Drain Requirements

■Use the new drain hose supplied with your dishwasher. If this is not long enough, use a new drain hose with maximum length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the

1" (2.5 cm) drain connector of the dishwasher.

■Connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

Drain Air Gap

■Use a drain air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above the subfloor or floor.

■Use ½" (1.3 cm) minimum I.D. drain line fittings.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Importante Table of Contents ÍndiceTable DES Matières Dishwasher Safety You need toParts Supplied Installation RequirementsTools and Parts Tools NeededLocation Requirements Product DimensionsInstallation Clearances Cutout Dimensions Water Supply RequirementsElectrical Requirements If direct wiring dishwasherIf connecting dishwasher with a power supply cord Drain RequirementsInstallation Instructions Unpack Dish DrawerPrepare Cabinet Opening Option 1 Solid surface countertop installation Option 2 Wood countertop installationPrepare Dishwasher Route Electrical Wiring Option 1 Right-Hand Side Utility RouteOption 2 Left-Hand Side Utility Route Option 1 Right-Hand Side Utility Access Option 2 Left-Hand Side Utility AccessRoute Water Supply Line and Drain Hose Option 1 Waste Disposer No Drain Air Gap Option 2 No Waste Disposer and Drain Air GapMake Electrical Connection Option 3 Waste Disposer and Drain Air GapOption 4 No Waste Disposer, No Drain Air Gap Install Trim Pieces and Level Dishwasher Adjust legs Option 1 Solid surface countertop Complete InstallationSecure Dishwasher Option 2 Wood countertopIf you need Assistance or Service OFFPage Seguridad DE LA Lavavajillas Usted necesitaPiezas suministradas Requisitos DE InstalaciónPiezas y herramientas Herramientas necesariasRequisitos del suministro de agua Espacios libres para la instalación Dimensiones de corteRequisitos de ubicación Medidas del productoRequisitos eléctricos Requisitos de desagüeSi va a hacer un cableado directo para la lavavajillas Prepare la abertura del armario Instrucciones DE InstalaciónDesempaque el cajón para platos Purga de aire del desagüePrepare la lavavajillas Opción 1 Instalación para un mostrador de superficie sólidaOpción 2 Instalación para un mostrador de madera Dirija el cableado eléctrico Opción 1 Ruta de servicio del lado derechoOpción 2 Ruta de servicio del lado izquierdo Opción 1 Acceso de servicio por el lado derecho Mangueras de desagüe Opción 2 Acceso de servicio por el lado izquierdoOpción 1 Recipiente de desechos sin purga de aire de desagüe Conexión del suministro eléctrico Lavavajillas Ajuste las patasAsegure la lavavajillas Complete la instalación Opción 2 Mostrador de maderaOpción 1 Mostrador de superficie sólida Si necesita ayuda o servicio técnico Sécurité DU LAVE-VAISSELLE Opérations à exécuterPièces fournies Exigences D’INSTALLATIONOutillage et composants Outillage nécessaireExigences d’emplacement Dimensions du produitSpécifications de l’alimentation en eau Raccordement direct du lave-vaisselle Spécifications électriquesRespecter Branchement de l’appareil à l’aide dun cordon dalimentationInstructions D’INSTALLATION Déballage du lave-vaisselleDu placard Préparation du lave-vaisselle Option 2 Plan de travail en boisInstallation du câblage électrique Option 1 Accès aux raccordements électriques par la droite Eau et des tuyaux de vidange Option 2 Accès au système électrique par la gaucheRemarques Raccordement du circuit électrique Installation des pièces de VaisselleArrimage du lave-vaisselle Achever l’installation Option 1 Plan de travail en matériau durSi vous avez besoin d’assistance ou de service W10300218B

W10300218B specifications

The Maytag W10300218B is a versatile and well-engineered appliance designed to enhance your kitchen experience. Whether you are a seasoned chef or an everyday cook, this model is equipped with features that prioritize efficiency, reliability, and user convenience.

One of the standout characteristics of the Maytag W10300218B is its powerful motor, which delivers superior performance while maintaining energy efficiency. This appliance is designed to tackle tough cooking tasks, ensuring that your meals are prepared quickly and effectively. The motor’s robustness is matched by the durability of the unit, with high-quality materials used throughout to withstand the rigors of daily use.

The W10300218B comes with a range of helpful technologies aimed at simplifying cooking processes. One key feature is its innovative cooking modes, which include options for baking, broiling, and roasting. These modes are customizable, allowing users to fine-tune temperatures and timing to achieve the perfect dish every time.

Additionally, this model includes a user-friendly digital control panel, making it easy to navigate the various settings. The large display provides clear information, allowing for precise programming and enhancing the overall cooking experience.

Another notable aspect of the Maytag W10300218B is its self-cleaning technology, which takes the hassle out of maintaining the appliance. This feature utilizes high heat to eliminate residues and spills, ensuring that your appliance remains clean with minimal effort.

Furthermore, the appliance incorporates advanced cooling features to enhance food preservation, making it suitable for the modern kitchen. This ensures that your meals not only cook well but also retain their freshness longer.

Lastly, the sleek and stylish design of the Maytag W10300218B makes it a perfect fit for any kitchen decor, blending functionality with modern aesthetics. Its compact size also allows for easy installation, even in smaller kitchens.

Overall, the Maytag W10300218B is an excellent choice for anyone seeking a reliable and efficient appliance that combines advanced features with user-friendly technology.
Top Page Image Contents