Maytag MDB6600AW, MDBH950AW, MDB9600AW, MDBL540AW, MDBF750AW, MDBH970AW manual Controls AT a Glance

Page 53

CONTROLS AT A GLANCE CONT.

DELAY

The Delay option can be used to auto- matically start the cycle at a later time to reduce daytime heat buildup in the home or to take advantage of reduced energy costs if available in your area.

TO SET UP A DELAY:

1.Close the door. Select the appropriate cycle and options for the load.

2.Press the Delay pad until the desired amount of delay time is selected.

3.The Delay indicator will flash until the START/Cancel pad is pressed.

4.As soon as the START/Cancel pad is pressed, the flashing will stop and the delay time will begin counting down. The Delay indicator will remain lit until the delay time has counted down.

5.The cycle will automatically start as soon as the delay time expires.

Note:

If 30 seconds elapse between setting the cycle and options and pressing the START/Cancel pad, the dish- washer will turn off.

TO CANCEL A DELAY:

When the delay is counting down, press the Delay pad again.The indicator light will go out and the cycle will start or resume immediately.

TO CANCEL A DELAY AND CYCLE:

Press START/Cancel once to drain and turn off the dishwasher.

Or

Press START/Cancel twice to turn dishwasher off without draining.

CONTROL LOCK OPTION

(select models)

The control touchpads can be locked to prevent unwanted use. If this feature is activated between cycles, the dishwasher cannot be operated until the controls are unlocked. If desired, the controls can be locked after a cycle or delay has started.

SETTING THE CONTROL LOCK:

1.Press the Heated Dry pad for three seconds.

2.An indicator light next to the lock graphic will illuminate when the con- trols are locked.

TO CANCEL:

1.Press the Heated Dry pad for three seconds.

2.The indicator light will go off.

Note:

If a cycle or option pad is pressed after the controls have been locked, the indicator light next to the lock graph- ic will flash five times. On selected models with a countdown display, the display will flash an “L” simultaneously with the lock indicator.

This option does not lock the door, only the dishwasher controls.

OPERATING TIPS

STARTING THE

DISHWASHER

1.After loading the dishwasher and adding detergent, close the dishwasher by pressing the door until the latch clicks.

2.To start the dishwasher, select the desired cycle and options. The indica- tor lights for the selected cycle and options will illuminate.

3.Press the START/Cancel pad.After a pause, the fill will begin. The display countdown will flash until START/ Cancel is pressed.

4.To cancel an option, press the pad again. To cancel a running cycle, press the START/Cancel pad.

5.To prevent unplanned cycle or option

changes, these selections are “locked in” after 1 minute.

Note:

If a cycle pad is pressed after the con- trols have been “locked in”, the light above the current cycle will flash three times.

If START/Cancel is not pressed within 30 seconds, the dishwasher will turn off.

ADDING A

FORGOTTEN ITEM

For best cleaning, the forgotten item should be added early in the cycle.

1.Grasp door handle and unlatch door without opening completely. All lights

will flash to indicate that the cycle is suspended.

2.Wait for the water circulation to stop.

3.Open the door and add the item.

4.Close and latch the door. Lights will stop flashing when the door is proper- ly shut.

5.After a slight delay, the cycle resumes automatically at the point of interruption.

Note:

If the door is opened during a run- ning cycle, there may be up to a 30 second delay before the unit restarts after closing the door.

Extended interruption of the wash cycle is not recommended.

©2002 Maytag Appliance Sales Company

16021814 Rev. 0

B-9

Image 53
Contents Jetclean Dishwashers ServiceImportant Notices for Consumers and Servicers Recognize Safety Symbols, Words, and LabelsCustomer Service Support Center Important InformationTable of Contents General Precautions and Warnings Important Safety InformationGeneral Information Related PublicationsPrecaución REV Electrical Test Equipment Electrical Equipment & TestingAppliance Test Meter Digital Test MeterGrounding and Polarity Motor Test CordClamp-On Ammeter Use of Ammeter on dishwasherDetergent / Rinse Aid Dispenser Wax Motor CheckWax Motor Check- Vent Cycles Cycles & OptionsOption Description Display Description ENN-AIR MDBH970 Overflows Electrical-Mechanical TroubleshootingWill Not Fill Will Not Drain Poor WashabilityContinues To Drain Poor DryingWater Leaks Electrical Mechanical TroubleshootingNoise Will Not Start Or ProgramWill Not Wash Field Service TestWill Not Dry Manual Function TestFront Support and Toe Panel Removal Service and Disassembly ProceduresRemoval Disconnect power to the machine Detergent / Rinse Dispenser Mechanism and Reservoir Checking Operation Disconnect power to the machineInner Door Panel Vent Wire CoverWax Motor Detergent / Rinse Dispenser Switch Removal Disconnect power to the machine Door Latch & Switch Holder AssemblyControl Panel PC BoardRemoval ReplacementOuter Door Door Hinge and Support Door SpringTop Wash Arm Door Spring and Component Replacement Over Pressure FilterLower Wash Arm Manifold Docking StationFloat To Check Float Switch Disconnect power to the machineWattage Checks To Check Heating Element Disconnect power to the machineHeating Element Water Valve ThermostatsAir Water Inlet Checking Valve OperationTurbidity Sensor Upper Rack RemovalTub Wheels Drain Pump Wash Motor AssemblyService and Disassembly Procedures AppendixA Built-In Dishwasher Built-In Dishwasher 16021814 Rev Refer to local plumbing codes / Consulte los códigos locales 13B Black to Black L1 Negro CON Negro L1 Start On some models Appendix B User Do not tamper with controls Important Safety InstructionsLoading With the Stack-Rack select models BackModels flat in the back, left corner pro Side. With the shelf down, two levelsHinged Be sure that thin, notSharp and p o i n t e d Items Your loadHard 10-12 gpg Normal SoilControls AT a Glance Controls AT a Glance Special Care Items Before YOU Call for Service Indicator Lights Flashing Dishwasher Warranty Appendix C Operating Tips Important Safety Instructions Loading Loading Loading Dishwashing essentials Options Controls at a glance Special care items Before you call Glasses Are Cloudy/Spotted To receive warranty service Appendix D Pages Dishwasher MDB-4Important Safety Instructions Scrape off tomato-based food soils see LoadingRack For best cleaning results, prevent itemsDown to NestingUtility Basket for Lower Rack will come to a stop when it is in positionHot water 16021814 Rev Short cycle for light food soils. Water usage is 6 gallonsFull load. Controls odors gallons Controls at a glance To cancel a running cycle, press the START/Cancel padMaterial Dishwasher Safe? Special Informatiion Special care itemsDishwasher Will Not Fill Indicator Lights FlashingDishwasher Will Not Drain/Water In Tub Bottom Dishwasher Adds Water at END of CycleFood Soil Remains on Dishes Glasses Are Cloudy/SpottedDishware is Chipped Dishwasher Door Will Not CloseLimited Second Year Warranty Full One Year WarrantyLimited Third Through Fifth Year Warranty Full Twenty-Year Warranty

MDB5600AW, MDB6600AW, MDB7600AW, JDB4000AW, MDB8600AW specifications

The Maytag MDB7600AW, MDB6600AW, MDB8600AW, MDBF550AW, and MDBF750AW dishwashers combine power, efficiency, and innovation, designed to tackle tough stains while providing user-friendly features. Maytag is known for its strong performance, making these models popular choices for homeowners seeking reliable dishwashing solutions.

Starting with their cleaning capabilities, these dishwashers are equipped with the PowerBlast Cycle, which utilizes high-pressure jets to remove stubborn food particles, ensuring that dishes come out spotless. The dedicated scrubbers can handle baked-on messes and pet food debris, making them ideal for busy households.

Energy efficiency is another strong suit of these models. Many of the dishwashers feature the Energy Star certification, indicating they consume less water and electricity without compromising performance. This not only helps reduce utility bills but also contributes positively to environmental sustainability.

The capacity of these models is thoughtfully designed to accommodate a wide variety of dishware. With adjustable racks and ample space, users can easily fit pots, pans, and large platters. The MDB8600AW and MDB7600AW offer a third rack for extra loading flexibility, allowing for more efficient use of space.

In terms of reliability, Maytag emphasizes durability with their stainless steel tub, which resists stains and provides long-lasting performance. Furthermore, these dishwashers come with a 10-year limited parts warranty, giving users peace of mind regarding any potential issues.

Technologically, the models are equipped with smart features like a soil sensor that detects how dirty the dishes are and adjusts the wash cycle accordingly. The Quiet Series technology ensures that operations remain quiet, allowing for a peaceful home environment while the dishwasher is running.

The exterior of these models is sleek and modern, available in various finishes to match different kitchen decors. With intuitive controls and various wash cycle options, users can select the ideal setting for their dishwashing needs, from quick washes to heavy-duty cycles.

In summary, the Maytag MDB7600AW, MDB6600AW, MDB8600AW, MDBF550AW, and MDBF750AW dishwashers are designed for consumers who value efficiency and powerful cleaning. With high-performance features, energy savings, capacity for large loads, durability, and advanced technology, these dishwashers are a strong choice for any kitchen. Whether tackling everyday dishes or more challenging messes, Maytag continues to deliver exceptional cleaning results.