Maytag MET8885XS, W10289539A manual Electronic Oven Controls

ELECTRONIC OVEN CONTROLS

AB C

K	J	I		G F	E	D
			H
A. Upper oven settings					G. Upper oven cancel
B. Oven display					H. Start
C. Options settings					I. Temp/time
D. Oven light					J. Lower oven settings
E. Cooktop warming center					K. Convect settings
F. Lower oven cancel

Display

When power is first supplied to the range or if a power failure occurs, “12:00” will appear on the display. See “Clock” in the “Settings” section to set time of day.

When the oven is not in use, the display shows the time of day.

4.Press KITCHEN TIMER to clear the display.

NOTE: A reminder beep will sound until the Kitchen Timer is canceled.

To Cancel:

Press KITCHEN TIMER.

Cancel

The Cancel pads stop any function except the Clock, Timer and Control Lock.

Oven Lights

While the oven doors are closed, press OVEN LIGHT to turn the lights on and off. The oven light for the selected oven will come on when the door is open. The oven lights will not come on during the Self-Clean cycle.

Kitchen Timer

The Kitchen Timer can be set in hours or minutes up to 9 hours and 59 minutes, and counts down the set time. The Kitchen Timer does not start or stop the oven.

To Set:

1.Press KITCHEN TIMER.

“Set TIMER” will scroll down the upper text display area, and the clock will display “--:--” with the colon flashing.

2.Press the Temp/Time “+” or “-” pads until the desired time is reached.

“Press TIMER” will scroll down the upper text display area.

3.Press KITCHEN TIMER. The colon stops flashing, and the time begins counting down. “TIMER STARTED” will scroll down the upper text display area.

The last minute of the timer countdown will be displayed in seconds.

At the end of the set time, one long beep will sound, and “TIMER End” will be displayed.

Settings

Fahrenheit and Celsius

The temperature is factory preset to Fahrenheit, but can be changed to Celsius.

1.Press SETTINGS once.

“TEMP UNIT” appears in the upper text area. “Fahrenheit Press (+) for Celsius” will scroll twice in the lower text area.

2.Press the Temp/Time “+” pad to change the temperature unit setting.

“CELSIUS. Press (+) for Fahrenheit” will scroll twice from right to left in the lower text area.

3.“CELSIUS Selected” will scroll twice from right to left in the lower text area. The temperature units have been changed.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

■Valid pad press

■End of Kitchen Timer (long tone)

■Function has been entered

Two tones

■Oven is preheated

Three tones

■Invalid pad press

Four tones

■End of cycle

9