Maytag MDB6000AWA Operating Tips io e, Starting Dishwasher Adding Forgotten, Indicator Lights

eoe_oeeeeoeeeeOeeoeIeeteOeeeeQoeeOee_eoeOeaeeOe__ee_eeeeee_eeeoeeeeeeeeeeoeeeeee_

Pots & Pans provides additional heated dry time. The Pots & Pans option does NOT add heated dry time in Quick Wash/Rinse.

Note: Use Pots & Pans to aid in the removal of I

and to boost drying,

tough, difficult food soils (such, i as Starches and fats) I Pots & Pans OFF cancels the water temperature checks and the additional heated dry time.

Temp Sense ON ensures proper water temperature in the Normal, Light, and China/Crystal cycles. If neces- sary, the cycle is extended until proper water tempera-

ture is reached. When either the wash or rinse portions

of the cycle is being extended, the HEATING DELAY light is illuminated.

Note: Use this option if the incoming wate perature is below 120°F due to other demand as showers and laundry.

Temp Sense OFF cancels the water temperatur

Heated Dry ON improves drying results by tu in the main wash and rinse.

the heating element during the dry portion of tit Heated Dry OFF turns the heating element el

the dry portion of the cycle. Towel drying of sol may be necessary with this selection and more 1 may be noticed on the dishwasher interior.

Note: With either dry option, it is normal to vapor coming out of the _,ent area.

		Operating			"tips ioe	oeoe eeeoeee	oe	Deoeeoeoeoeee	oee ooeeoeeeoDeeooeel
Starting			The Dishwasher				Adding		a Forgotten	Item
[]	After loading the dishwasher				and adding	detergent,	For best cleaning, the forgotten item should 1:
	set the control			knob to the desired cycle and press			early in the cycle.
	the appropriate			option button(s).			[]	Unlatch the door.
.......	Note:	When	the	control knob is set at Normal or			[]	Wait for the water circulation		to stop.
	Light,	Intelliclean		ON should be selected.			[]	Open the door and add the item.
]Run		the water		from the hot water tap to clear the			[]	Close and latch the door.
	line of cold water before starting.
[]	Press the door			until it latches. The cycle will begin			[]	The cycle resumes automatically.
	with a drain prior to fill.

:::: Note: Water heating and dry options can be used separately or together. To make a selection, press the Isponding on/off button.

	Indicator Lights
	Delay Start illuminates when this option is selected.
........	The light stays on until the start of the cycle,
	Smart Sensor illuminates after the prerinse and pre-
	wash in the IntelliClean _M cycle option. During this
: :_:	time, the dishwasher will either hold or drain it's present
	water fill.
:
::
....

Clean illuminates at the end of the dry cI remains lit until the control knob has been r

advanced to OFF.

_ Heating Delay illuminates to indicate that 1 is being extended to heat the water to the proI perature. The location of the _ symbol aro

control knob corresponds to the heating delay of the cycle.