Cycles at a Glance, Hina / Cry sta l is

Cycles at a Glance .............................................

....	_ ms
START SENSORCLEAN DELAy
_"IMnYrA6 J_CLEAN_SS.WAS_ERS-SUpE_CA,AC_-OUSETF_W/	_._k°ob

Your dishwasher is designed with technology that automatically determines the proper number of water fills need clean your dishes. Select IntelliClean '_ ON when setting the control knob at Normal or Light. This automati adjusts the number of drains and fills based on the soil level of the load. Water can be saved because there are no k unnecessary drains and fills when the dishes are already clean! This dishwasher also still provides you with the al to select the specific cycle and/or option of your choice.

Cycles

Located around the knob on the right side of the panel,

*Normal with InteUi-	Prewash	10.4 Gal.
Clean ON is designed	*Sensor check	(the
for washing loads con-	Prerinse	IntelliClean'_
taining dishes with	*Sensor check	option may
heavy or normal tbod	Main Wash	decreasewater
soils.	Prerinse	usageto aslow
	Hi-Temp Rinse	as6.2gal.)
	Dry
Light with IntelliClean	Prewash	8.3 Gal.

ON is designed to wash *Sensor check (theIntelliClean'_

loads containing dishes	Main Wash	option may
with lighter amounts of	Prerinse	decreasewater
food soils.	Hi-Temp Rinse	usageto as low
	Dry	as 6.2 gal.)
.............................................................
China/Crystal is	Main Wash	6.2 Gal.
designed for washing	Prerinse
crystal, china or lightly	Hi-Temp Rinse
soiled dishes.	Dry
.............................................................
Quick Wash/Rinse	Wash	4.4 Gal.
is designed for use when Rinse

lightly soiled dishes are

Delay Start allows you to set the dishwasher to op,

at a more convenient time or during off- peak er rate hours. Simply turn the knob to the desired nu

of delay hours and latch the door.

IntelliClean TM Option

utilizes a sensor to customize the number of wate_

needed for the cycle. This sensor interprets the soil and assesses the need for a drain and refill of

While the sensor is making this decision, there is a I of approximately 4 minutes and the SMART SEN

light is illuminated. Depending on the decision ma_

the sensor, you may or may not hear a drain an during this pause.

Select IutelliCleau ON when setting the control kr either the Normal or Light cycle.

Normal with IntelliCleau ON has two pauses for checks, one at the end of the prewash and one at of the prerinse portions of the cycle.

Light with IntelliClean ON has one pause for a check. This occurs at the end of the prewash port_ the cycle.

IntelliClean OFF turns off the SMART SENSO1 The Normal and Light cycles will function with tl_

predetermined number of drains, fills and water u_,

] Note: The IntelliClean TM sensor in the pump n

..............................................................needed in a hurry

Rinse & Hold rinses Rinse

dishes being held until the dishwasher is full.

This cycle helps reduce the potential for odors to develop,

................................

* Manufacturer's recommended cycle choice.

2.0 Gal.

. ...... • • •

I thestaylastsubmerged,drainin theso acycleshor.t fill of water is added

Other Options

Pots & Pans ON checks the main wash and fina temperature. If needed, the cycle is interrupted t water to the proper temperature and the HE_ DELAY light is illuminated.